Re: [chuck-users] chuck + PulseAudio (was: Problem with multiple audion sources)

Ah, my mistake. The tgz at that URL has been updated and should be good to go now. Also, quick note, the pulse build is used when you run 'make linux-pulse'. In addition to the usual development libraries that chuck uses, you need 'libpulse-dev' installed (PulseAudio development headers/etc.). spencer On Thu, Nov 14, 2013 at 4:12 PM, Joel Matthys wrote:

Hmm... there's no src folder in the ChucK link below.

Joel

On 11/14/2013 06:01 PM, Spencer Salazar wrote:

Hello ChucK linux users,

We are excited to have a beta version of chuck that features PulseAudio support! While PulseAudio is not always ideal for professional audio usage, we absolutely recognize that its a popular choice for general-purpose Linux installations. We would love it if Linux + Pulse users could try out the beta and report any feedback, issues, etc.

ChucK source (version 1.3.3.0-beta-3): http://chuck.stanford.edu/release/files/beta/chuck-1.3.3.0-beta-3.tgz miniAudicle source (version 1.3.1-beta-3): http://chuck.stanford.edu/release/files/beta/miniAudicle-1.3.1-beta-3.tgz

Thanks, spencer

On Wed, Nov 6, 2013 at 1:12 AM, Harald wrote:

...

pulseaudio should usually work out of the box because most linux desktop distributions have this installed and configured, so it should be nice for beginners.

But musicians etc. / linux music distributions usually use jackd.

Apart from that alsa allows to create virtual devices to be routed through pulse or jack for those who know how to do it. So alsa would be a good choice for all, but unfortunately desktop distributions don't come with alsa on top of pulse (from what I remember).

So there should be a choice between all these systems, probably with default to pulse and a BIG comment at a prominent place saying latency etc. may be bad and using jackd would be better. Users who can install jackd should also be able to choose a sound device in chuck.

General rule: choose a good default for beginners and allow advanced configuration for experts.

On Tue, Nov 5, 2013 at 11:51 PM, Morgan wrote:

...

My understanding is that chuck and or miniaudicle tries to 'own' your soundcard... it doesn't like to share.... but these instructions tell it to route through the mixer software

I had similar issues (on Mint KDE which i believe has alot in common with KUbunutu), until I found and followed these directions for editing the audio config before compiling (from https://class.coursera.org/chuck101-001/forum/thread?thread_id=130 ) -

"We need to edit one of the files to allow audio mixing through PulseAudio, so that playing ChucK will not block other audio sources such as the sound in the course videos.

Use a text-editor (preferably one that shows line-numbers) to open the file:

kate RtAudio/RtAudio.cpp

Find line 5660:

sprintf( name, "hw:%d,%d", card, subdevice );

Revise this to read:

//sprintf( name, "hw:%d,%d", card, subdevice ); // commented out sprintf( name, "pulse" );

Find line 5699:

int openMode = SND_PCM_ASYNC;

Revise this to read:

int openMode = SND_PCM_ASYNC; printf( "pcm name %s\n", name ); // line inserted

Save the file and close Kate (or whatever text-editor you used)."

THEN compile etc

I believe these directions should either be part of the linux readme or better still be scripted into the source... ubuntu/mint being the most popular distros thse days.

Morgan

On 5 November 2013 15:49, wrote:

...

I am a new chuck user and have just installed linux-alsa from source. All works well as long as there is no other audio source active. If there is another active audio source active I get this message when, for example, I type in chuck --loop:

[chuck]: RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.

This seems to be a chuck issue as I can run multiple audio sources as long as one of them is not chuck. My concern is that I started a coursera course on chuck and would like to use chuck concurrently with the course.

My operating system is Kubuntu Linux 12.04.

Does anyone have any ideas?

Thank you, Monon

_______________________________________________ chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________ chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________ chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________ chuck-users mailing listchuck-users@lists.cs.princeton.eduhttps://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________ chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users