2017-06-04 2:46 GMT-03:00 Joel Matthys
On 06/04/2017 12:35 AM, Alexandre Torres Porres wrote:
It seems that when you have a phase input to SinOsc, it'll only consider that input and disregard any frequency input, is that possible?
Yes, that is correct. IIRC, doesn't cyclone have some oscillators that work that way as well?
The only oscillator with a phase input in cyclone (or max) is cycle~ it has a frequency input in the left inlet and a phase input in the right inlet. But sending a phase signal to drive cycle~ does not anule the phase input at all! And this is what I'm suspecting it's happening in Chuck, and what you seem to be confirming to me. Phasor p => SinOsc osc => dac; 440 => p.freq; // 440 => osc.freq; 1 => osc.sync; 4::second => now; In the above code, I have a Phasor driving the oscillator, and the same result as if I had a SinOsc with the same frequency as the Phasor's frequency... Now, if I uncomment the line "// 440 => osc.freq;", nothing changes! As if the frequency input is anuled or something. Going back to cycle~, the two input are valid, and the result is that the output frequency is 880 hz (the sum of both inputs). Now, that makes phase modulation extremely trivial and simple with cycle~ I know I'm close to doing it in Chuck, If uncommenting that line in the code did work, I'd be done with it, but I'm stuck... Is it really impossible to set both a frequency value and a phase input from another Unit Generator? If not, then adding a signal to the Phasor output has got to do the job. But how can you do that? cheers