On Sep 14, 2014, at 10:38 PM, Joel Matthys wrote:

I wonder if there is something about the fact that the note-on and note-off messages come in fast succession that causes ChucK to miss them or conflate them.

Given that Michael's test worked fine, your point about the fast succession somehow might be it.   

I'm just guessing here, but it's possible that instead of two 3-byte messages, ChucK is reading them as one 6-byte message, which can't get parsed properly. (Are MIDI messages parsed at sample rate? I don't know; it seems unlikely.

I agree, because I would assume that a lower layer is buffering the messages, and passing them properly to Chuck.

But you could try running ChucK at a much higher sample rate and see what happens.)

If you're feeling ambitious, you could try recompiling ChucK with a printf in midiio_rtmidi.cpp to see how many bytes are being received.

Joel

So thanks again Joel and Michael!  Now I have several things I can try to narrow down the problem.

Best,
Daniel



On 09/15/2014 12:11 AM, Daniel Chapiro wrote:
Hi Joel,

The WX5 controller is monophonic, and one plays it like a sax (should/can I tell Chuck anything about it being monophonic?). I hadn't noticed before that the timing is so close: it's what the WX5 does when one plays a new note without having broken the stream of air (regardless of how slowly). 

Wivi (Wallander Virtual Instruments synthesizer, meant for wind controllers) uses this info to choose a legato articulation. Midi monitor catches all the events too, but you are right that they are fast.

However, since all the succeeding CCs do appear correctly in gomidi, it seems that Chuck is not losing the synchronization. Hence, if the problem is strictly raw speed, shouldn't at least later Key ON events show up? 

Thanks,
Daniel


On Sep 14, 2014, at 9:14 PM, Joel Matthys wrote:

Is it possible that your WX5 is in some kind of monophonic mode? Look at the time stamps on your MIDI Monitor output:
20:34:33.207	From In	Note On	1	F2	30
20:34:33.208	From In	Note Off	1	E2	0
20:34:33.534	From In	Note On	1	G2	30
20:34:33.535	From In	Note Off	1	F2	0
Your note-offs are always just one tick after the next note-on; that is, essentially simultaneous. There's certainly no audible overlap.

Joel

On 09/12/2014 07:43 PM, Daniel Chapiro wrote:
Hi - I think that Chuck's Midi methods seem not to be working (except for very simple examples), as Chuck is dropping Midi events - I'm using the pre-compiled version of Chuck 1.3.0 (gidora), on a Mac Mini (2.7GHz I7), with OSX 10.7.5 (Lion).

The only type of ON/OFF sequence in which Chuck seems not to "swallow" any notes is of the form Note1 ON, Note1 OFF, Note2 ON, Note2 OFF…  Instead, I'm generating Midi streams in which there are new note On events before the prior note goes off. They happen when I play legato with a Yamaha WX5 wind controller, but any Midi keyboard would also generate such sequences if one presses a new key before releasing another one that is already sounding.

I captured the following short sequence with the "MIDI Monitor" app (http://www.snoize.com/MIDIMonitor/). Also it sounds fine with different sound generators):

20:34:33.026	From In	Note On	1	E2	22
20:34:33.030	From In	Control	1	Breath Control (coarse)	20
20:34:33.036	From In	Control	1	Breath Control (coarse)	25
20:34:33.041	From In	Control	1	Breath Control (coarse)	27
20:34:33.071	From In	Control	1	Breath Control (coarse)	29
20:34:33.182	From In	Control	1	Breath Control (coarse)	30
20:34:33.207	From In	Note On	1	F2	30
20:34:33.208	From In	Note Off	1	E2	0
20:34:33.534	From In	Note On	1	G2	30
20:34:33.535	From In	Note Off	1	F2	0
20:34:33.664	From In	Control	1	Breath Control (coarse)	32
20:34:33.845	From In	Note On	1	A2	32
20:34:33.846	From In	Note Off	1	G2	0

Capturing the same with Chuck only shows the 1st Note ON (and all the CCs, which are correct), but the rest of the Note ONs/OFFs vanish (BTW, playing very slowly makes no difference). To make sure it was not some bug in my code, I captured the Midi using just Chuck's example in miniAudicle->File->Open Example->MIDI->gomidi (the numeric output is converted below, just for readability): 

Note On	E2	22
CC 	BC (msb)	20
CC	BC (msb)	25
CC	BC (msb)	27
CC	BC (msb)	29
CC	BC (msb)	30
CC	BC (msb)	32

Only by fully ending each note before playing the succeeding one, all the Note ONs/OFFs show up. But that's not useable...

Any help on incantations for Chuck, workarounds, or a fix would be great! (particularly since after learning to ChucK from Rob Poor's Oxygen8, the rest of my ChucK code seems to be working nicely :-)

Thanks!
Daniel




_______________________________________________
chuck-users mailing list
chuck-users@lists.cs.princeton.edu
https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________
chuck-users mailing list
chuck-users@lists.cs.princeton.edu
https://lists.cs.princeton.edu/mailman/listinfo/chuck-users



_______________________________________________
chuck-users mailing list
chuck-users@lists.cs.princeton.edu
https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

_______________________________________________
chuck-users mailing list
chuck-users@lists.cs.princeton.edu
https://lists.cs.princeton.edu/mailman/listinfo/chuck-users