Re: [chuck-users] ChucK on a Beaglebone Black

Hi Michael, what I will write here now is my personal opinion and based on my personal experience and it will definitely not match the opinion and or experience of others in any case... ;) Angstrom is good for starting BBW and BBB. I also started with Angstrom previously on my BBW but continously updateing this distro screwed up the whole thing after a while. You will find similiar posting on the beagleboard mailing list from time to time. Since I made good experience with Gentoo on my desktop PC I tried that on my BBW and it works clean and consistantly...until I tried to cross-compile the applications on my desktop PC. May be some leve eight failures, which normally are located in front of monitors and keyboards ;) some header settings from my PC were incorperated into the BBW Linux and KABOOM!...64bit is a little different from 32bit... As soon as I have confirmed that my new BBB is ok, I quit Angstrom and the eMMC and installed Gentoo on a SD-card and used that instead. I am really happy with that. But be warned! :) Gentoo is source-based. Means: Everything is compiled from ground up on the BBB. THIS TAKES TIME! Compiling a kernel natively on the BBB takes about eight houres. On the other side: The BBB consumes about 5W. Start the compile task before going to bed and the next morning will start with a new kernel. ;) The advantage of Gentoo is, that you will only compile applications, you will want for your projects. Nothing else will bloat your Linux system on the BBB -- something which is important especially on embedded systems due to space limitations. Gentoo is very flexible, too. The precompiled rootfs (link to it) for Gentoo and further instructions you will find here: http://dev.gentoo.org/~armin76/arm/beagleboneblack/install.xml The Gentoo documentation is a good source of information, too. The kernel is the only thing which I still compile on my PC. At this place a BIG THANK YOU will go to Robert Nelson, which sets up a really easy and flexible kernel-building-suit for the BBB and BBW. All you need kernelwise you will find here: http://eewiki.net/display/linuxonarm/BeagleBone He also gives instructions how to build "Das U-Boot", the bootloader. This way (Gentoo+Robert Nelsons kernel+U-Boot) no part of the Linux system will be out of your control. You will be able to modify anything. And: Since Gentoo is source based, the complete gcc-suite is already there -- natively on your BBB. You may need to dig a liitle deeper into the docs and manuals for doing so, though. But, hey: UNIX is not Windows. The kernel I am using is Robert Nelsons kernel version 3.8.13. I am using the LCD7 (a2) cape and the AUDIO cape (A1) together with my BBB, and it needs a little hacking the device tree and the kernel sources to let play them all together. You will need to disable the HDMI and the eMMC to be able to use this combo. Chuck is compiled with alsa support. There is currently no X11 running. There is no .asoundrc. Angstrom has a limited support of applications. Since it is binary based, you will be out of luck, if the application you want is not included. Gentoo includes ChucK in its emerge/ebuild system. If you need help to hack the kernel source and the devicetree to let the AUDIO cape work for your BBB let me know. But I will take no responsibility if it will not work, since my modifications are only tested for a specific setup with specific versions of the board: BB-BONE-AUDI-01 (Audio cape) Beaglebone black A5C BB-BONE-LCD7-01 (LCD cape) If you dont want to use the LCD7 cape it is no problem to modify the hack to only use the Audio Cape... Best regards, mcc Michael Heuer [13-10-01 07:00]:

Hey, very cool! I have a Beaglebone Black sitting on my desk still in the box for just this purpose.

There are a lot of things that might effect audio performance: what kernel are you using? what audio card? what driver? is chuck compiled for jack or alsa? what are your jackd settings? what are your alsa settings in .asoundrc? etc.

I am planning to use mine with a USB audio card but wasn't sure which linux distro to start with. I assume chuck is not available for Angstrom?

michael

On Mon, Sep 30, 2013 at 11:44 PM, wrote:

...

Hi,

I managed to compile chuck on a beaglebone black (using Gentoo).

Most of the example files play well, but there are some files, which produce a somehow interrupted sound.

If this would be due to too less processing power of the CPU (ARMv7 Processor rev 2 (v7l) at 1GHz) -- how can I verify it?

What else could produce this problem?

Best regards, mcc

_______________________________________________ chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users

---

chuck-users mailing list chuck-users@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/chuck-users