Hello ,
Thanks a lot for your help. I still have some general questions and some about the program that follows:
1. Where can i find a chuck editor with the possibility to find words and replace them (all) and that also gives the colors for reserved words etc.
2. Is there a way to debug line per line to discover logical errors?
3. i discovered by accident that sometimes i can use "p.puf" but on other occasions i have to write "p.buf()" why is this?
4. in the program hereby, is there a way to have the pan do it's job independantely from the note-envelope-flow? to go faster or slower?
5. When i run this program it does what i want but i can't figure out why it says 2 times "p.pan = 1.000000" and 2 times "p.pan= -1.000000" (see below)
Thanks !!
Herman
---------------------------------------------------- program ------------------------------------------------------------------
// sound file
me.sourceDir() + "wavefile.wav" => string filename;
if( me.args() ) me.arg(0) => filename;
<<>>;
// the patch
SndBuf buf => ADSR e => Pan2 p => dac;
// set attack time, decay time, release time and pause time
dur attack; dur decay ; dur release; dur pauze;
12::ms => attack ; 90::ms => decay ; 100::ms => release ; 5::ms => pauze ;
// load file in buf
filename => buf.read;
// set gain
.5 => buf.gain;
// set a, d, s and r
e.set( attack, decay, 0.001, release );
// switch is needed to stay in the "else" step untill p.pan = -1
0 => int switch;
// begin pan extreme left
-1 => p.pan;
// time loop
while( true )
{
Math.random2(0,900000) => buf.pos;
Math.random2f(1.0,1.2) => buf.rate;
if( p.pan() < 1.0 && switch == 0)
{
p.pan() + .10 => p.pan;
<<<"if p.pan = ",p.pan()>>>;
}
else
{
p.pan() - .10 => p.pan;
<<<"else p.pan = ", p.pan()>>>;
1 => switch;
if (p.pan() == -1)
{
0 => switch;
}
}
// key on - start attack
e.keyOn();
attack + decay => dur ontime;
ontime => now;
// key off - start release
e.keyOff();
// advance time by releasetime + pausetime
release + pauze => now;
}
---------------------------------------------------------console result print----------------------------------------------------
if p.pan = -0.900000
if p.pan = -0.800000
if p.pan = -0.700000
if p.pan = -0.600000
if p.pan = -0.500000
if p.pan = -0.400000
if p.pan = -0.300000
if p.pan = -0.200000
if p.pan = -0.100000
if p.pan = -0.000000
if p.pan = 0.100000
if p.pan = 0.200000
if p.pan = 0.300000
if p.pan = 0.400000
if p.pan = 0.500000
if p.pan = 0.600000
if p.pan = 0.700000
if p.pan = 0.800000
if p.pan = 0.900000
if p.pan = 1.000000
if p.pan = 1.000000
else p.pan = 0.900000
else p.pan = 0.800000
else p.pan = 0.700000
else p.pan = 0.600000
else p.pan = 0.500000
else p.pan = 0.400000
else p.pan = 0.300000
else p.pan = 0.200000
else p.pan = 0.100000
else p.pan = 0.000000
else p.pan = -0.100000
else p.pan = -0.200000
else p.pan = -0.300000
else p.pan = -0.400000
else p.pan = -0.500000
else p.pan = -0.600000
else p.pan = -0.700000
else p.pan = -0.800000
else p.pan = -0.900000
else p.pan = -1.000000
else p.pan = -1.000000
if p.pan = -0.900000
if p.pan = -0.800000
if p.pan = -0.700000
if p.pan = -0.600000
if p.pan = -0.500000
if p.pan = -0.400000
