Is it possible that your WX5 is in some
kind of monophonic mode? Look at the time stamps on your MIDI
Monitor output:
20:34:33.207 From In Note On 1 F2 30
20:34:33.208 From In Note Off 1 E2 0
20:34:33.534 From In Note On 1 G2 30
20:34:33.535 From In Note Off 1 F2 0
Your note-offs are always just one tick after the next note-on;
that is, essentially simultaneous. There's certainly no audible
overlap.
Joel
On 09/12/2014 07:43 PM, Daniel Chapiro wrote:
Hi - I think that Chuck's Midi methods seem not to be working (except for very simple examples), as Chuck is dropping Midi events - I'm using the pre-compiled version of Chuck 1.3.0 (gidora), on a Mac Mini (2.7GHz I7), with OSX 10.7.5 (Lion).
The only type of ON/OFF sequence in which Chuck seems not to "swallow" any notes is of the form Note1 ON, Note1 OFF, Note2 ON, Note2 OFF… Instead, I'm generating Midi streams in which there are new note On events before the prior note goes off. They happen when I play legato with a Yamaha WX5 wind controller, but any Midi keyboard would also generate such sequences if one presses a new key before releasing another one that is already sounding.
I captured the following short sequence with the "MIDI Monitor" app (http://www.snoize.com/MIDIMonitor/). Also it sounds fine with different sound generators):
20:34:33.026 From In Note On 1 E2 22
20:34:33.030 From In Control 1 Breath Control (coarse) 20
20:34:33.036 From In Control 1 Breath Control (coarse) 25
20:34:33.041 From In Control 1 Breath Control (coarse) 27
20:34:33.071 From In Control 1 Breath Control (coarse) 29
20:34:33.182 From In Control 1 Breath Control (coarse) 30
20:34:33.207 From In Note On 1 F2 30
20:34:33.208 From In Note Off 1 E2 0
20:34:33.534 From In Note On 1 G2 30
20:34:33.535 From In Note Off 1 F2 0
20:34:33.664 From In Control 1 Breath Control (coarse) 32
20:34:33.845 From In Note On 1 A2 32
20:34:33.846 From In Note Off 1 G2 0
Capturing the same with Chuck only shows the 1st Note ON (and all the CCs, which are correct), but the rest of the Note ONs/OFFs vanish (BTW, playing very slowly makes no difference). To make sure it was not some bug in my code, I captured the Midi using just Chuck's example in miniAudicle->File->Open Example->MIDI->gomidi (the numeric output is converted below, just for readability):
Note On E2 22
CC BC (msb) 20
CC BC (msb) 25
CC BC (msb) 27
CC BC (msb) 29
CC BC (msb) 30
CC BC (msb) 32
Only by fully ending each note before playing the succeeding one, all the Note ONs/OFFs show up. But that's not useable...
Any help on incantations for Chuck, workarounds, or a fix would be great! (particularly since after learning to ChucK from Rob Poor's Oxygen8, the rest of my ChucK code seems to be working nicely :-)
Thanks!
Daniel
_______________________________________________
chuck-users mailing list
chuck-users@lists.cs.princeton.edu
https://lists.cs.princeton.edu/mailman/listinfo/chuck-users