Hi everyone, I'm trying to connect a mic via a Tascam US-122L to my mac, which works fine in other programs, however I get the following error when I do chuck --dac4 --in1 test.ck (the Tascam is nicely recognized as dac4, and the test just consists of adc => dac) [chuck]: (via rtaudio): unable to open specified device(s) with given stream parameters: ... RtApiCore: OS-X error setting the buffer size for device (TASCAM: US-122L). [chuck]: cannot initialize audio device (try using --silent/-s) I've tried all permutations of --dac, --in, --bufsize, --blocking etc. with no success. With --silent there are no errors, but of course, some sound would be nice... Curiously, when I do all of the above in miniAudicle, I never get any errors (but no sound either). I'd be grateful for any hints! jo p.s. this is the chuck --probe part chuck]: ------( chuck -- dac4 )--------------- [chuck]: device name = "TASCAM: US-122L" [chuck]: probe [success] ... [chuck]: # output channels = 2 [chuck]: # input channels = 2 [chuck]: # duplex Channels = 2 [chuck]: default device = NO [chuck]: natively supported data formats: [chuck]: 8-bit int [chuck]: 16-bit int [chuck]: 24-bit int [chuck]: 32-bit int [chuck]: 32-bit float [chuck]: 64-bit float [chuck]: supported sample rates: [chuck]: 44100 Hz [chuck]: 48000 Hz [chuck]: 88200 Hz [chuck]: 96000 Hz