Has anyone had any luck running chuck on windows with the Digi 001? I've run chuck --probe and apparently the 001 reports sample rate of 100 and 100000! Only an srate of 100000 will output anything. I've tried various bufsize and bufnum combinations, but can only get choppy audio. Here's what chuck --probe prints out: C:\Documents and Settings\student\Desktop\chuck-1.2.0.4-exe\chuck-1.2.0.4-exe\bi n>chuck.exe --probe [chuck]: found 5 device(s) ... [chuck]: ------( chuck -- dac1 )--------------- [chuck]: device name = "Primary Sound Driver" [chuck]: probe [success] ... [chuck]: # output channels = 2 [chuck]: # input channels = 0 [chuck]: # duplex Channels = 0 [chuck]: default device = YES [chuck]: natively supported data formats: [chuck]: 16-bit int [chuck]: supported sample rates: [chuck]: 100 Hz [chuck]: 100000 Hz [chuck]: [chuck]: ------( chuck -- dac2 )--------------- [chuck]: device name = "Digidesign Digi 001: Chan 1-2 (emulated)" [chuck]: probe [success] ... [chuck]: # output channels = 2 [chuck]: # input channels = 0 [chuck]: # duplex Channels = 0 [chuck]: default device = NO [chuck]: natively supported data formats: [chuck]: 16-bit int [chuck]: supported sample rates: [chuck]: 100 Hz [chuck]: 100000 Hz [chuck]: [chuck]: ------( chuck -- dac3 )--------------- [chuck]: device name = "SoundMAX Digital Audio" [chuck]: probe [success] ... [chuck]: # output channels = 2 [chuck]: # input channels = 2 [chuck]: # duplex Channels = 2 [chuck]: default device = NO [chuck]: natively supported data formats: [chuck]: 16-bit int [chuck]: supported sample rates: [chuck]: 11025 Hz [chuck]: 22050 Hz [chuck]: 44100 Hz [chuck]: [chuck]: ------( chuck -- dac4 )--------------- [chuck]: device name = "Primary Sound Capture Driver" [chuck]: probe [success] ... [chuck]: # output channels = 0 [chuck]: # input channels = 2 [chuck]: # duplex Channels = 0 [chuck]: default device = YES [chuck]: natively supported data formats: [chuck]: 16-bit int [chuck]: supported sample rates: [chuck]: 11025 Hz [chuck]: 22050 Hz [chuck]: 44100 Hz [chuck]: [chuck]: ------( chuck -- dac5 )--------------- [chuck]: device name = "SoundMAX Digital Audio" [chuck]: probe [success] ... [chuck]: # output channels = 2 [chuck]: # input channels = 2 [chuck]: # duplex Channels = 2 [chuck]: default device = NO [chuck]: natively supported data formats: [chuck]: 16-bit int [chuck]: supported sample rates: [chuck]: 11025 Hz [chuck]: 22050 Hz [chuck]: 44100 Hz [chuck]: [chuck]: ------( chuck -- 1 MIDI inputs )------ [chuck]: [0] : "Digidesign Digi 001" [chuck]: [chuck]: ------( chuck -- 2 MIDI outputs )----- [chuck]: [0] : "Microsoft GS Wavetable SW Synth" [chuck]: [1] : "Digidesign Digi 001" [chuck]: Any help will be appreciated. paul botelho