December 2003 - ixp1200 - lists.cs.princeton.edu

I am newbie
by Liang Jian 23 Dec '03

23 Dec '03

hi,all I saw Intel ixp1200 and ixp2400 docs for days and I have a radisys ENP2611 board. so I will do on the borad. are you give me some suggestion? and where have a open lab or projects,except vera and netbind, I want to study about ixp2400 or ixp2800 microcode and where have electronic books thanks. Regards. --------------------------------- Do you Yahoo!? Free Pop-Up Blocker - Get it now

1 0

Re:./bootscript
by Darshan Uka 19 Dec '03

19 Dec '03

Hello, While running the script ./bootscript the following errors are seen in the minicom terminal. For this part of the script expect{ "[root@Linux modules]$" } !./.install_PCI_driver i got the following error: [root@Linux modules]$./ .install_PCI_driver: insmod:command not found. For this part of the script expect{ "[root@Linux modules]$" } !./.send_mount I got the following error: [root@Linux modules]$mount -t nfs 140.192.37.41:/opt /nfs mount: RPC : Port mapper failure -RPC: Unable to send For this part of the script expect{ "[root@Linux modules]$" } !./.send_set_ifconfig I got the following error: [root@Linux modules]$ifconfig eth0 140.192.37.230 PCINetDev: pciDg_net_open has not received conn Id SIOCSIFFLAGS: Operation not permitted. Any suggestions on how i could fix these errors. Thanks, -Darshan. _________________________________________________________________ Enjoy the holiday season with great tips from MSN. http://special.msn.com/network/happyholidays.armx

2 1

Re:pinging ENP2505-linux host
by Darshan Uka 19 Dec '03

19 Dec '03

Hi, After booting the linux through the minicom window i am still not able to ping the target[ENP 2505 board] from the linux host terminal and vice-versa.Any suggestions? Also the nfs mount doesn't work quite well while booting.Any suggestions? Thanks, -Darshan _________________________________________________________________ Grab our best dial-up Internet access offer: 6 months @$9.95/month. http://join.msn.com/?page=dept/dialup

1 0

(no subject)
by Darshan Uka 17 Dec '03

17 Dec '03

Hello, Does anyone have the enp_changes_ixa_sdk.patch ? Thanks, -Darshan _________________________________________________________________ Make your home warm and cozy this winter with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

1 0

(no subject)
by Darshan Uka 16 Dec '03

16 Dec '03

Hi, While trying to configure the dhcp based on the following instructions from linux setup guide for ENP from Radisys: Q.1.How do i find the mac address of the ENP board? I did a /sbin/ifconfig but it shows the ip and mac of only the NIC card installed on it. Thanks, 4.4.Configure DHCP The DHCP protocol should be configured to supply an IP address to the ENP system using the BOOTP protocol. 1. Edit or create the configuration file /etc/dhcpd.conf adding Set a.b.c.d to your subnet address Set e.f.g.h to your subnet mask Set i.j.k.l to your gateway address Set m.n.o.p to your target IP address Set xx:xx:xx:xx:xx:xx to your ENP MAC address. allow bootp; subnet a.b.c.d netmask e.f.g.h { default-lease-time 1209600; max-lease-time 31557600; option routers i.j.k.l; group { host enp_linux.radisys.com { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address m.n.o.p; } } } -Darshan _________________________________________________________________ Grab our best dial-up Internet access offer: 6 months @$9.95/month. http://join.msn.com/?page=dept/dialup

1 0

Problem of installing vmware at Redhat Linux 7.3
by Ning Weng 15 Dec '03

15 Dec '03

Hello, In attempting to install VMware on Redhat Linux 7.3 I got the message "What is the location of the C header files that match your running kernel [/usr/src/linus/include]? It doesn't like /usr/src/redhat or /usr/lib or /usr/include. One of the messages is that it is looking for "linux" "asm" "net" and can't find them, although I can see them. Another message is that the directory has the wrong version kernel and is needs the correct one. What is the best thing for me to do? Thanks, -Ning

2 1

RE: [ixp1200] Re:boot driver file
by Darshan Uka 12 Dec '03

12 Dec '03

Hello Tim, Thanks. I will do so. -Darshan. ----Original Message Follows---- From: tstevens <tim.stevens(a)intec.ugent.be> Reply-To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Date: Fri, 12 Dec 2003 14:06:52 +0100 MIME-Version: 1.0 X-Sender: tstevens(a)pop.intec2.ugent.be Received: from bluebox.CS.Princeton.EDU ([128.112.136.38]) by mc1-f5.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Fri, 12 Dec 2003 05:03:16 -0800 Received: from mm.CS.Princeton.EDU (mm.CS.Princeton.EDU [128.112.136.88])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBCD3Dcp016530(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);Fri, 12 Dec 2003 08:03:13 -0500 (EST) Received: from mm.CS.Princeton.EDU (localhost [127.0.0.1])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBCD3A5l005078;Fri, 12 Dec 2003 08:03:12 -0500 (EST) Received: from ribavirin.CS.Princeton.EDU (navgw [128.112.136.44])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with SMTP id hBCD395k005073for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 08:03:09 -0500 (EST) Received: from bluebox.CS.Princeton.EDU ([128.112.136.38])by ribavirin.CS.Princeton.EDU (NAVGW 2.5.2.17) with SMTP idM2003121208030821456for <ixp1200(a)lists.cs.princeton.edu>; Fri, 12 Dec 2003 08:03:08 -0500 Received: from plinius.intec.ugent.be (plinius.intec.ugent.be [157.193.122.4])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP idhBCD16co016337 for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 08:03:08 -0500 (EST) Received: from localhost (localhost [127.0.0.1])by plinius.intec.ugent.be (Postfix) with ESMTP id 4046BBD52for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 14:01:05 +0100 (CET) Received: from lampo.intec.ugent.be (lampo.intec.ugent.be [157.193.122.186])by plinius.intec.ugent.be (Postfix) with ESMTP id 4774BBD51for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 14:01:03 +0100 (CET) X-Message-Info: yilqo4+6kc4bNFF0EkwhX+wjF3GlP/JR X-Mailman-Handler: $Id: mm-handler,v 1.2 2002/04/05 19:41:09 bwarsaw Exp $ Message-Id: <5.2.1.1.0.20031212134346.03e92ba0(a)pop.intec2.ugent.be> X-Mailer: QUALCOMM Windows Eudora Version 5.2.1 X-Virus-Scanned: by AMaViS snapshot-20020222 X-BeenThere: ixp1200(a)lists.cs.princeton.edu X-Mailman-Version: 2.1.3 Precedence: list List-Id: IXP1200 Developer's List <ixp1200.lists.cs.princeton.edu> List-Unsubscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=unsubscribe> List-Archive: <https://lists.cs.princeton.edu/mailman/private/ixp1200> List-Post: <mailto:ixp1200@lists.cs.princeton.edu> List-Help: <mailto:ixp1200-request@lists.cs.princeton.edu?subject=help> List-Subscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=subscribe> Errors-To: ixp1200-bounces(a)lists.cs.princeton.edu Return-Path: ixp1200-bounces(a)lists.cs.princeton.edu X-OriginalArrivalTime: 12 Dec 2003 13:03:17.0039 (UTC) FILETIME=[4F1A0BF0:01C3C0B0] Hi, We encountered the same problem with the boot_drv rpm and the remainder of the mail explains how we solved it. IMPORTANT NOTE: 1) Please notice the "3" in our boot_drv RPM filename. This means we are not using the boot_drv RPM supplied by Intel anymore, because we noticed packet loss using the Intel package on a Radisys ENP-2505 board (see previous postings). Probably, this does *not* apply to non-RadiSys boards meaning you can use the Intel supplied package in those situations. However, the installation fault encountered (and the solution) was the same for both versions of the package... Here is a step-by-step guide to solve the problem: - rpm -recompile boot_drv-2.0.1-3.src.rpm There's a fault in the installation script. The installation will fail at a certain point. The remainder of the driver installation will have to be done manually: - cd /usr/src/RPM/BUILD/driver/bootixp/ - Modify create_environment.rc: Change "HOST_I = eth1" to "HOST_I = ethx" with x the number of non-IXP1200 NIC's in the computer. - Modify .create_environment: Change "exportfs -ra" to "exportfs -ra >& /dev/null" - cd /usr/src/RPM/BUILD/driver/src/boot_drv/ - Modify load_bv: Change major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` to major=`cat /proc/devices | grep $module | cut -d ' ' -f 1` - Modify Makefile: Change cp bvloadapp ../bin to cp bvloadapp $(BOOTDIR) Change cp $(TARGET).o ../bin to cp $(TARGET).o $(BOOTDIR) Add to "install: all" section: (use TAB, not 8 spaces !!!) cp load_bv $(BOOTDIR) cp unload_bv $(BOOTDIR) - make clean - make dep - make - make install - cd /usr/src/RPM/BUILD/driver/src/pciDg - Modify rules.mk: Change ARM-KERNEL-INCLUDES = $(PWD)/../linux/include to ARM-KERNEL-INCLUDES = $(PWD)/../linuxIXAedu/include Change X86-KERNEL-INCLUDES = to X86-KERNEL-INCLUDES = /usr/src/linux/include Change CFLAGS = -g -O2 -Wall -I ../module to CFLAGS = -g -O2 -Wall -I ../module -I $(X86-KERNEL-INCLUDES) - make clean - make - make install - cd /usr/src/RPM/BUILD/driver/ - mkdir /opt/ixasdk/enp-2505 - cp -fR * /opt/ixasdk/enp-2505 - Eventually reboot the machine (probably not necessary) Hope this helps. Best regards, Tim _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _________________________________________________________________ Take advantage of our best MSN Dial-up offer of the year six months @$9.95/month. Sign up now! http://join.msn.com/?page=dept/dialup

1 0

Re:boot driver file
by tstevens 12 Dec '03

12 Dec '03

Hi, We encountered the same problem with the boot_drv rpm and the remainder of the mail explains how we solved it. IMPORTANT NOTE: 1) Please notice the "3" in our boot_drv RPM filename. This means we are not using the boot_drv RPM supplied by Intel anymore, because we noticed packet loss using the Intel package on a Radisys ENP-2505 board (see previous postings). Probably, this does *not* apply to non-RadiSys boards meaning you can use the Intel supplied package in those situations. However, the installation fault encountered (and the solution) was the same for both versions of the package... Here is a step-by-step guide to solve the problem: - rpm -recompile boot_drv-2.0.1-3.src.rpm There's a fault in the installation script. The installation will fail at a certain point. The remainder of the driver installation will have to be done manually: - cd /usr/src/RPM/BUILD/driver/bootixp/ - Modify create_environment.rc: Change "HOST_I = eth1" to "HOST_I = ethx" with x the number of non-IXP1200 NIC's in the computer. - Modify .create_environment: Change "exportfs -ra" to "exportfs -ra >& /dev/null" - cd /usr/src/RPM/BUILD/driver/src/boot_drv/ - Modify load_bv: Change major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` to major=`cat /proc/devices | grep $module | cut -d ' ' -f 1` - Modify Makefile: Change cp bvloadapp ../bin to cp bvloadapp $(BOOTDIR) Change cp $(TARGET).o ../bin to cp $(TARGET).o $(BOOTDIR) Add to "install: all" section: (use TAB, not 8 spaces !!!) cp load_bv $(BOOTDIR) cp unload_bv $(BOOTDIR) - make clean - make dep - make - make install - cd /usr/src/RPM/BUILD/driver/src/pciDg - Modify rules.mk: Change ARM-KERNEL-INCLUDES = $(PWD)/../linux/include to ARM-KERNEL-INCLUDES = $(PWD)/../linuxIXAedu/include Change X86-KERNEL-INCLUDES = to X86-KERNEL-INCLUDES = /usr/src/linux/include Change CFLAGS = -g -O2 -Wall -I ../module to CFLAGS = -g -O2 -Wall -I ../module -I $(X86-KERNEL-INCLUDES) - make clean - make - make install - cd /usr/src/RPM/BUILD/driver/ - mkdir /opt/ixasdk/enp-2505 - cp -fR * /opt/ixasdk/enp-2505 - Eventually reboot the machine (probably not necessary) Hope this helps. Best regards, Tim

1 0

RE: [ixp1200] Re:boot driver file
by Darshan Uka 11 Dec '03

11 Dec '03

Hello Joel, Thanks, but since the file is 47.3MB i don't think my mail box can handle it. It would be very helpful if you could upload it on some website and i could download it using ftp or http. Thank you so much. -Darshan ----Original Message Follows---- From: "Schuetze, Joel D" <joel.d.schuetze(a)intel.com> Reply-To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> Subject: RE: [ixp1200] Re:boot driver file Date: Thu, 11 Dec 2003 14:31:17 -0800 MIME-Version: 1.0 Received: from bluebox.CS.Princeton.EDU ([128.112.136.38]) by mc10-f2.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Thu, 11 Dec 2003 14:31:33 -0800 Received: from mm.CS.Princeton.EDU (mm.CS.Princeton.EDU [128.112.136.88])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBBMVQcp026981(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);Thu, 11 Dec 2003 17:31:26 -0500 (EST) Received: from mm.CS.Princeton.EDU (localhost [127.0.0.1])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBBMVORB017531;Thu, 11 Dec 2003 17:31:26 -0500 (EST) Received: from ribavirin.CS.Princeton.EDU (navgw [128.112.136.44])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with SMTP id hBBMVNRA017526for <ixp1200(a)lists.cs.princeton.edu>;Thu, 11 Dec 2003 17:31:23 -0500 (EST) Received: from bluebox.CS.Princeton.EDU ([128.112.136.38])by ribavirin.CS.Princeton.EDU (NAVGW 2.5.2.17) with SMTP idM2003121117312301480for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 17:31:23 -0500 Received: from hermes.jf.intel.com (fmr05.intel.com [134.134.136.6])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP idhBBMVLco026966 for <ixp1200(a)lists.cs.princeton.edu>;Thu, 11 Dec 2003 17:31:22 -0500 (EST) Received: from talaria.jf.intel.com (talaria.jf.intel.com [10.7.209.7])by hermes.jf.intel.com (8.12.9-20030918-01/8.12.9/d: major-outer.mc,v 1.11 2003/12/03 18:29:28 root Exp $) with ESMTP id hBBMWak5010524for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 22:32:36 GMT Received: from orsmsxvs040.jf.intel.com (orsmsxvs040.jf.intel.com[192.168.65.206])by talaria.jf.intel.com (8.12.9-20030918-01/8.12.9/d: major-inner.mc,v 1.6 2003/12/04 00:48:44 root Exp $) with SMTP id hBBMUjnL012241for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 22:30:48 GMT Received: from orsmsx331.amr.corp.intel.com ([192.168.65.56])by orsmsxvs040.jf.intel.com (SAVSMTP 3.1.1.32) with SMTP idM2003121114311721621for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 14:31:17 -0800 Received: from orsmsx410.amr.corp.intel.com ([192.168.65.64]) byorsmsx331.amr.corp.intel.com with Microsoft SMTPSVC(5.0.2195.5329); Thu, 11 Dec 2003 14:31:17 -0800 X-Message-Info: yilqo4+6kc6Detr5UNYgvBJdl6mKbCqc X-Mailman-Handler: $Id: mm-handler,v 1.2 2002/04/05 19:41:09 bwarsaw Exp $ content-class: urn:content-classes:message X-MimeOLE: Produced By Microsoft Exchange V6.0.6487.1 Message-ID: <EFC3A13CCA5957439255D7DB679F2C8713FCDB(a)orsmsx410.jf.intel.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [ixp1200] Re:boot driver file Thread-Index: AcPALb7ChCpbYLG6Rh2K1JWZ5/jr5QACEBRg X-OriginalArrivalTime: 11 Dec 2003 22:31:17.0737 (UTC)FILETIME=[7E5E1D90:01C3C036] X-Scanned-By: MIMEDefang 2.31 (www . roaringpenguin . com / mimedefang) X-BeenThere: ixp1200(a)lists.cs.princeton.edu X-Mailman-Version: 2.1.3 Precedence: list List-Id: IXP1200 Developer's List <ixp1200.lists.cs.princeton.edu> List-Unsubscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=unsubscribe> List-Archive: <https://lists.cs.princeton.edu/mailman/private/ixp1200> List-Post: <mailto:ixp1200@lists.cs.princeton.edu> List-Help: <mailto:ixp1200-request@lists.cs.princeton.edu?subject=help> List-Subscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=subscribe> Errors-To: ixp1200-bounces(a)lists.cs.princeton.edu Return-Path: ixp1200-bounces(a)lists.cs.princeton.edu Darshan, I will mail it to you. Cheers, Joel -----Original Message----- From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto:ixp1200-bounces@lists.cs.princeton.edu] On Behalf Of Darshan Uka Sent: Thursday, December 11, 2003 1:28 PM To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Hello, Does any one have the boot_drv-2.0-1.src.rpm file? Mine gives an error while doing the rpm -recompile boot_drv-2.0-1.src.rpm Thanks, -Darshan _________________________________________________________________ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _________________________________________________________________ Cell phone switch rules are taking effect find out more here. http://special.msn.com/msnbc/consumeradvocate.armx

1 0

RE: [ixp1200] Re:boot driver file
by Schuetze, Joel D 11 Dec '03

11 Dec '03

Darshan, I will mail it to you. Cheers, Joel -----Original Message----- From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto:ixp1200-bounces@lists.cs.princeton.edu] On Behalf Of Darshan Uka Sent: Thursday, December 11, 2003 1:28 PM To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Hello, Does any one have the boot_drv-2.0-1.src.rpm file? Mine gives an error while doing the rpm -recompile boot_drv-2.0-1.src.rpm Thanks, -Darshan _________________________________________________________________ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

1 0