It isn't correct for the software to send two receive requests as you have described in this scenario. When the MAC asserts the receive ready bit for a port it means (unless configured differently) that 1 mpacket is available. Before issuing the second receive request the software must wait for the receive ready bit to both get updated (i.e., the ready bus sequencer must poll the MAC and update the receive ready CSR) and be set. You will get unpredictable results when doing this on the IXF440. Of course, this is only true of the IXF440, not the IXF1002, since the IXF1002 can be sent speculative receive requests. In your scenario, the IXF1002 will send a cancelled receive control message for the second request. erik
-----Original Message----- From: Wen Xu [mailto:wxu@CS.Princeton.EDU] Sent: Wednesday, April 17, 2002 7:57 AM To: ixp1200@CS.Princeton.EDU Subject: [ixp1200] question on behavior of IXF440/IXF1002
Hi,
My question is like this:
In the middle of receiving a 1500 byte packet, if at some point the MAC has 100 bytes in its Receive FIFO (but the end of packet is not there yet) and set the ready flag, but two data requests come to the port instead of one.
Will the MAC send 36 bytes of data for the second request? Or will it simply assert error for the second request, keeping the 36 byte in the Receive FIFO for next data request?
Wen