Hellow, Again struggling with the IXP1200 Hardware, Problem i'm facing is when i'm running any program in "hardware" as the debugging mode...it's giving an error that .." Error in Opening Connection to 10.5.19.164 (target IP)" not able to understand why? as everything else is working fine.... 1... below is a snap shot of VxWork Com port...one unusal thing i have noticed here...."0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included. " Snap shot of VxWorks Com1 Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. Loading... 712620 + 14184 + 67968 Starting at 0x1000... BSP IXP Version: 1.3.141, built on Jun 5 2001, 19:18:11 CPU ID: 6901C123 CPU Speed: 200 MHz Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included. VxWorks Copyright 1984-1998 Wind River Systems, Inc. CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version: 1.2/2 Creation date: Jun 5 2001 WDB: Ready. 2...FTP server is running fine...IXP kit is downloading the boot file (VxWorks correctly).. 3..Tonado server is launching correctly...below is snap shot of the log console.. tgtsvr (10.5.19.164@nitin): Fri Dec 10 11:21:27 2004 Wind River Systems Target Server: NT/Win95 version Connecting to target agent... succeeded. Attaching C++ interface... succeeded. Attaching coff OMF reader for ARM CPU family... succeeded. 4... Tornado shell is also opening correctly. can anyone help me out, as i'm struggling wd. this frm a v long time now....even a hint wd. b of gr8 help.... regards, Nitin