Hi, We are in the process of installing the IXP2400 based development board (ENP2611) referring the IXA Education Workstation Setup Guide. We have installed all the software as per the following procedure: 1. Installed Redhat Linux 7.3 in one PC. 2. Installed Windows2000 in the second PC. 3. Installed IXASDK3.51 in the Linux machine. 4. Installed the Montavista Preview Kit. 5. In the Windows machine, we have installed the IXASDK3.51, IXASDK3.51 Firmware and Drivers, IXASDK Software Framework 3.51. We are able to simulate some sample programs. 6. We have plugged in the ENP2611 board in the Linux machine. On switching on the host PC, we observed that display and keyboard is not active, We assume the system is not booting when the board is plugged into the system. We also observed that the ENP2611 board is getting powered on and communicating with the Windows based machine through the serial link. (We are getting the display on the windows machine in the hyperterminal as �Redboot >�. 7. It was also observed that on removal of ENP2611 board from the linux host, the PC works properly. Can anyone suggest the procedure to overcome this installation problem. Thanks in advance. Regards, Sridevi.P _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com