Hallo,
My apologies first for asking
a question not related to Vera. I am using SDK 2.01 on an IXP1240
(192.168.133.38) and trying to get the Linux kernel to boot up in
Cygmon from a remote Linux tftp server (192.168.133.40). I am having the problem
of Cygmon stuck at the message: TFTPing /tftpboot/zImage... the moment I issued
a glinux command without returning a login prompt on the remote
shell.
My config is as follows:
Local IP (192.168.133.40)
Remote IP (192.168.133.38)
Linux kernel file name (zImage)
Linux ramdisk file name
(ramdisk_img.gz)
Linux kernel load offset (C4008000)
sram size : 4k
dram size: 0x6FFF000
Upstream win:1M
Next, I tried out from Cygmon:
tftp 192.168.133.38 192.168.133.40
/tftpboot/ramdisk_img.gz 0xc1000000 but the same problem occurs. It stops at
TFTPing /tftpboot/ramdisk_img.gz...
In fact, I can ping to the target when this
message appears and an "tftp unreachable" packet was also captured. I don't
quite understand this because I am sure the TFTP
server is working correctly as I could get the file
'zImage' or 'ramdisk_img' that I want from the Linux server onto the WinNT
(192.168.133.133) which is also hooked to the same subnet for the purpose
of Workbench development by issuing a "tftp 192.168.133.38 GET
/tftpboot/zImage". I am running the server on Linux 7.2. The TFTP's port is
enabled and ipchain service is switched off.
I appreciate if anyone could offer me a pointer or
solution to that and how I could reach the stage of remote login
prompt.
kind regards,
cheewei