According to the ixaedu/ixasdk document you can run following command in
Linux to start the Linux system on board
/opt/ixasdk/enp-2505/bootixp/bootixp
I don't need to run command under the cygwon prompt.
You can follow the sdk manual though it is a little confusing.
----- Original Message -----
From: "Feng Tang"
Hello,
Currently, my problem when trying to boot linux is:
After the board entered cygmon, I typed "go" command, then the minicom screen show below information:
******************
cygmon>go cygmon_handle_exception()monitor_loop return=0 Returned from breakpoint Waiting for host based download
Press space bar to abort host download mode.... .. .. .. Press space bar to abort host download mode....
********************
Then I open another terminal and entered the directory of /opt/ixasdk/enp-2505/bin. I run the script .create_environment.rc and boot_bv. The screen of boot_bv show:
*********************
eht1: unknow interface: No such device rmmod: module pciDgNet is not loaded rmmod: module pciDg is not loaded Booting board before = 0x7e6c6700
*********************
Then the screen of minicom show below information:
********************
Booting linux.... Hit breakpointDisassembling 0xc4e9.8944 mrcge 13, 4, r9, cr3, cr14, {4} Waiting for host based download
Press space bar to abort host download mode... Press space bar to abort host download mode... ..