What microcode are you running to run this test? I will try to reproduce the problem here. --Dirk
-----Original Message----- From: Austen McDonald [mailto:austen@cc.gatech.edu] Sent: Wednesday, May 23, 2001 11:22 AM To: ixp1200@CS.Princeton.EDU Subject: [ixp1200] GigaMAC diagnostic problems...
Has anyone tried to use the diagnostics w/ the GigaMACs---we set it up and both internal and external loopback modes fail. We have the MAC enabled w/ jumper J34 and we get the status lights on both the ports when we loop a cable between them but the IXbus tx/rx tests fail---the microcode should send packets and recv them but it doesn't. I'm wondering if this is a hardware problem or a diagnostic program problem. I think it is the latter because if I run my own diagnostic program, I can get the GigaMAC's receive counter to increase when I send it packets (even though it doesnt appear to assert the rxrdy flag when the IX bus polls it). Any guidance?
Austen McDonald austen@cc.gatech.edu
God does not care about our mathematical difficulties. He integrates empirically. -- Albert Einstein