Hi - I was wondering if anyone has successfully used Developer Workbench to debug the ixp hardware (breakpoints, memory watch, etc) running linux. I've looked for a while, but the documentation from the developer's workbench doesn't really tell you what to do if it doesn't work, or how exactly it is supposed to work. If you have gotten it to work, or think that you know how, could you send me detailed directions or point me to some detailed directions. I have tried connecting by putting in the ip address (and I tried dns host name too) of the host that contains the IXP card into the Workbench's hardware options (and I selected to connect over ethernet). I tried it both from several hops away, and from the same switch the IXP is on. When I was on the same switch, I tried connecting both the the computer the IXP card is in, and the IP address who's ARP entry sends packets to the IXP card. Neither works. Our host machine and the StrongARM on the IXP are both running Linux. The machine I'm trying to connect from is running windows XP. If it's not possible to connect over ethernet, does anyone know of a way to connect Developers Workbench to the IXP card using a serial cable, if the card isn't running VxWorks? Thanks in advance, Craig Wampler CS Undergrad GA Tech