Hellow, I'm facing the following Problem with Tornado2.0 .. Tornado 2.0 was successfully installed, but I was unable to download a eg. Program on target. The error Im encountering is as follows, along with the steps I have followed. ________ _______________ Step 1: Install Tornado. Step 2: Open hyper terminal window (the one in Tornado2 program group) VxWorks COM1. Step 3: [Configuring FTP Server] Open FTP server app. Go to Security->User/rights. Create a new user(IXP1200) and password(IXP1200). Select the home directory [eg: C:\IXP1200\BoardSupport\bin\vb] in which vxworks boot image is present. Note: Im not getting any display in FTP window .. Step 4: Ive set my host IP address to 10.5.19.163 Step 5: Switch on the kit. U can see the count down. Step 6: Press space. U get [BootMgr] prompt. Type b 3, to boot into VxWorks. Step 7: Ull see the VxWorks boot count down. Press space to configure vxworks boot up. Configuration which I have set is shown below. [VxWorks Boot]: p boot device : eeE unit number : 0 processor number : 0 host name : nitin file name : c:\ixp1200\BoardSupport\bin\vb\VxWorks_gig inet on ethernet (e) : 10.5.19.164 host inet (h) : 10.5.19.163 user (u) : ixp1200 ftp password (pw) : ixp1200 flags (f) : 0x0 target name (tn) : TestTarget [VxWorks Boot]: Step 8: Started Tornado. Configure Target Server. Goto Tools -> Target Server- Ø Configure. Step 9: Launch the target server. Wait till u see a tornado icon in the system tray. Tornado icon has come in the tray ..on pressing tht. I got this view The error in the log console is as follows: tgtsvr (TestTarget@ixp1200): Fri Jul 09 12:21:38 2004 Wind River Systems Target Server: NT/Win95 version Connecting to target agent... Error: rpccore backend client Timed out failed. Connecting to target agent... Error: rpccore backend client Timed out failed. Step 10: Select the Target Server from the drop-down list and start the shell. Step 11: Ull see the following screen. Waiting to attach to target agent (press CTRL+Break to stop) \ Im also not able to ping the target from the host, its giving destinaion unreachable.. I ve checked the cross-over cable too thts perfectly fine. Ive also tried the entire set-up explained above by connecting the target and host viva a straight cable through a switch but encountered the same problem. if any one of u have faced such prob. do help me out. regards, Nitin Makhija M.tech(CS) IIT-Kharagpur