1. No. 2. This is fine! The "WDB: Ready." is the key that the image is loaded and you are ready to run. You should be able to connect with the Workbench no problem now. (Just make sure you have the NetApp application running on the core.) Best Regards, Pat ___________________________________ Patrick T. Kelley Technical Marketing Engineer Network Processor Operation - Network Communications Group Intel Corporation 77 Reed Road HD2-141 Hudson, Massachusetts 01749-2895 patrick.t.kelley.jr@intel.com http://www.intel.com -----Original Message----- From: Taroon Mandhana [mailto:mandhana@cs.utexas.edu] Sent: Friday, November 10, 2000 3:34 PM To: ixp1200@CS.Princeton.EDU Subject: VxWorks on IXP Hi, 1. Is tornado a MUST to download the reference designs on the board ? 2. Without Tornado, I tried downloading the default VxWorks image ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into the errors. Here is how the output looks like Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. o Loading... 8488 + 14136 + 228816 Starting at 0x1000... BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04 Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included. VxWorks Copyright 1984-1998 Wind River Systems, Inc. CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version1.2/1 Creation date: May 31 2000 WDB: Ready. STATUS OF intConnect = 0 BigMacDriver CTOR OctalMacNumber = 0 status = 0 status = ffffffff ----- Is is erroneous? Is there some troubleshooting guide in the documentation ? Any help is greatly appreciated. Thanks, Taroon Mandhana