Re: [ixp1200] l3fwdr

Hi, I have the configuration described below ENP-2505 eth1 192.168.1.150 connected to the 192.168.1.0 subnet through a hub. I am trying to ping a host 192.168.1.3 from the ENP-2505 and also the ENP-2505 from the host 192.168.1.3 . I am unable to do either . Although as I have said earlier there seems to be a lot of link level activity going on. Thanks, Kamesh. Nimit S Sawhney wrote:

Not being able to ping could be due to incorrect routing table entries on the host linux end. You might want to check those out...(I am assuming u r trying to ping from the host to the ENP's port) -N

----- Original Message ----- From: "Kameswara Avasarala" To: Sent: Tuesday, April 01, 2003 10:57 AM Subject: Re: [ixp1200] l3fwdr

...

Hi, I invoked ixstart with ixsys.config-sys-l3fwdr as the parameter. I could see that all the ace's and microaces are being loaded. The number of interfaces created was 1 since I commented out the extra entries in the config files, still I am unable to ping. However I see a lot of activity from the ethernet port. The led on the hub to which the ENP-2505 ethernet port is connected is blinking away furiously. Thanks, Kamesh.

Nimit S Sawhney wrote:

...

Renaming to ixsys.config is not a good idea since the original file is also needed. You can comment out the extra interfaces in the file "ixsys.config-sys-l3fwdr" since you have have only 4 ports on your ENP2505.

-Nimit