Hi, Please follow the following steps: Target server properties 1) BACK END Avilable back end : wdbrpc time out: 10 retry :5 target name / ip address:( type ip of kit) 2)Core File and Symbols click : file path target( if avilable) and global symbols the rest are unclicked 3) console and redirection click Redirect Target IO NOW CLICK LAUNCH Hope this helps. -- shorfuzzaman Quoting Mohammad Shorfuzzaman :

Hi,

On Fri, 4 Feb 2005, mahin jeyachandran wrote:

...

Hi, I am new to VxWorks and Tornado.. I am using tornado2.2.1..

I started to tools--> target server --> configure

I set in "Back End" as wdbserial and "Core files and symbols" as File --> C:\Tornado2.2\target\config\ixp1200eb\vxWorks.sym

when I click Launch I the following

tgtsvr (TestTarget@HostMachine): Fri Feb 04 16:40:27 2005 Checking License ...OK Connecting to target agent... succeeded. Attaching C++ interface... succeeded. Attaching elf OMF reader for ARM CPU family... succeeded.

Error: rpccore backend client Timed out

Can someone familiar with this error help me with this... I need to know why I get the error "Error: rpccore backend client Timed out"

Thanks a lot. Mahin. _______________________________________________ ixp1200 mailing list ixp1200@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

_______________________________________________ ixp1200 mailing list ixp1200@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

Hi shorfuzzaman, Thanks for your reply. I am not using kit. I am using ENP2505 board that hosts the IXP1200 processor. this board is attached to the PCI slot of my computer. I am new and I am trying to install this board and connect to target agent... How can I set the Ip address for the board.... as in the boot manager I do not find any option for setiing the Ip address.. some one please help me with this.. Thanks a lot for your help and consideration. Regards, Mahin. On Fri, 4 Feb 2005 18:06:47 -0600, Mohammad Shorfuzzaman wrote:

Hi, Please follow the following steps:

Target server properties 1) BACK END Avilable back end : wdbrpc time out: 10 retry :5

target name / ip address:( type ip of kit)

2)Core File and Symbols

click : file path target( if avilable)

and global symbols

the rest are unclicked

3) console and redirection

click Redirect Target IO

NOW CLICK LAUNCH

Hope this helps. -- shorfuzzaman

Quoting Mohammad Shorfuzzaman :

...

Hi,

On Fri, 4 Feb 2005, mahin jeyachandran wrote:

...

Hi, I am new to VxWorks and Tornado.. I am using tornado2.2.1..

I started to tools--> target server --> configure

I set in "Back End" as wdbserial and "Core files and symbols" as File --> C:\Tornado2.2\target\config\ixp1200eb\vxWorks.sym

when I click Launch I the following

tgtsvr (TestTarget@HostMachine): Fri Feb 04 16:40:27 2005 Checking License ...OK Connecting to target agent... succeeded. Attaching C++ interface... succeeded. Attaching elf OMF reader for ARM CPU family... succeeded.

Error: rpccore backend client Timed out

Can someone familiar with this error help me with this... I need to know why I get the error "Error: rpccore backend client Timed out"

Thanks a lot. Mahin. _______________________________________________ ixp1200 mailing list ixp1200@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

_______________________________________________ ixp1200 mailing list ixp1200@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ ixp1200 mailing list ixp1200@lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200