1. No. 2. This is fine! The "WDB: Ready." is the key that the image is loaded and you are ready to run. You should be able to connect with the Workbench no problem now. (Just make sure you have the NetApp application running on the core.) Best Regards, Pat ___________________________________ Patrick T. Kelley Technical Marketing Engineer Network Processor Operation - Network Communications Group Intel Corporation 77 Reed Road HD2-141 Hudson, Massachusetts 01749-2895 patrick.t.kelley.jr@intel.com http://www.intel.com -----Original Message----- From: Taroon Mandhana [mailto:mandhana@cs.utexas.edu] Sent: Friday, November 10, 2000 3:34 PM To: ixp1200@CS.Princeton.EDU Subject: VxWorks on IXP Hi, 1. Is tornado a MUST to download the reference designs on the board ? 2. Without Tornado, I tried downloading the default VxWorks image ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into the errors. Here is how the output looks like Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. o Loading... 8488 + 14136 + 228816 Starting at 0x1000... BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04 Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included. VxWorks Copyright 1984-1998 Wind River Systems, Inc. CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version1.2/1 Creation date: May 31 2000 WDB: Ready. STATUS OF intConnect = 0 BigMacDriver CTOR OctalMacNumber = 0 status = 0 status = ffffffff ----- Is is erroneous? Is there some troubleshooting guide in the documentation ? Any help is greatly appreciated. Thanks, Taroon Mandhana
How can we run netapp application without tornado? What does netapp application do and how will it affect if we dont run it? Thanks Alok On Fri, 10 Nov 2000, Kelley Jr, Patrick T wrote:
1. No. 2. This is fine! The "WDB: Ready." is the key that the image is loaded and you are ready to run.
You should be able to connect with the Workbench no problem now.
(Just make sure you have the NetApp application running on the core.)
Best Regards, Pat ___________________________________ Patrick T. Kelley Technical Marketing Engineer Network Processor Operation - Network Communications Group
Intel Corporation 77 Reed Road HD2-141 Hudson, Massachusetts 01749-2895 patrick.t.kelley.jr@intel.com http://www.intel.com
-----Original Message----- From: Taroon Mandhana [mailto:mandhana@cs.utexas.edu] Sent: Friday, November 10, 2000 3:34 PM To: ixp1200@CS.Princeton.EDU Subject: VxWorks on IXP
Hi,
1. Is tornado a MUST to download the reference designs on the board ?
2. Without Tornado, I tried downloading the default VxWorks image ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into the errors. Here is how the output looks like
Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. o
Loading... 8488 + 14136 + 228816 Starting at 0x1000...
BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04
Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included.
VxWorks
Copyright 1984-1998 Wind River Systems, Inc.
CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version1.2/1 Creation date: May 31 2000 WDB: Ready.
STATUS OF intConnect = 0 BigMacDriver CTOR OctalMacNumber = 0 status = 0 status = ffffffff
-----
Is is erroneous? Is there some troubleshooting guide in the documentation ?
Any help is greatly appreciated.
Thanks, Taroon Mandhana
_______________________________________________________________________________ Alok Kumar Residence: 3401 Red River St #201 Austin, TX 78705 Office: Dept of Computer Science ACES Building University of Texas Austin, TX 78712 Ph: Home - (512) 472-6443 Office - (512) 232-7883 Fax: (401) 679 8171 Homepage: http://www.cs.utexas.edu/~alok _______________________________________________________________________________
participants (2)
-
Alok Kumar -
Kelley Jr, Patrick T