Just for some basic setup info: There are two documents (which should be found on the Developer's Workbench CD) which are invaluable in setting up the Eval System and running the reference designs, the Evaluation System User's Guide and the Example Software User's Guide. There is information sepcific to loading VxWorks without using Tornado in Section 2.5.6 in the Evaluation System User's Guide, but please read through the rest of the document for general setup information. -----Original Message----- From: Varnell, Frank [mailto:frank.varnell@intel.com] Sent: Monday, November 13, 2000 12:06 PM To: 'Alok Kumar'; Kelley Jr, Patrick T Cc: 'Taroon Mandhana'; ixp1200@CS.Princeton.EDU Subject: RE: VxWorks on IXP The vxworks_gig image includes the RTM netapp application. The only thing you would then use Tornado for is to have a shell. The developers didn't use a serial port shell, so you have to buy or obtain an eval Tornado for ARM (version 2.0 NOT 2.0.1) to connect to the target if you need a shell. To be more specific, set up your eval card to boot vxworks via the instructions provided with your boad. Then set the vxworks parameters to load vxworks_gig. Thats all you have to do. Packets will be routed according to the compiled in tables. These comments apply to the 1.0 release of the ixp eval.
-----Original Message----- From: Alok Kumar [mailto:alok@cs.utexas.edu] Sent: Sunday, November 12, 2000 7:46 AM To: Kelley Jr, Patrick T Cc: 'Taroon Mandhana'; ixp1200@CS.Princeton.EDU Subject: RE: VxWorks on IXP
How can we run netapp application without tornado? What does netapp application do and how will it affect if we dont run it?
Thanks Alok
On Fri, 10 Nov 2000, Kelley Jr, Patrick T wrote:
1. No. 2. This is fine! The "WDB: Ready." is the key that the image is loaded and you are ready to run.
You should be able to connect with the Workbench no problem now.
(Just make sure you have the NetApp application running on the core.)
Best Regards, Pat ___________________________________ Patrick T. Kelley Technical Marketing Engineer Network Processor Operation - Network Communications Group
Intel Corporation 77 Reed Road HD2-141 Hudson, Massachusetts 01749-2895 patrick.t.kelley.jr@intel.com http://www.intel.com
-----Original Message----- From: Taroon Mandhana [mailto:mandhana@cs.utexas.edu] Sent: Friday, November 10, 2000 3:34 PM To: ixp1200@CS.Princeton.EDU Subject: VxWorks on IXP
Hi,
1. Is tornado a MUST to download the reference designs on the board ?
2. Without Tornado, I tried downloading the default VxWorks image ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into the errors. Here is how the output looks like
Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. o
Loading... 8488 + 14136 + 228816 Starting at 0x1000...
BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04
Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included.
VxWorks
Copyright 1984-1998 Wind River Systems, Inc.
CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version1.2/1 Creation date: May 31 2000 WDB: Ready.
STATUS OF intConnect = 0 BigMacDriver CTOR OctalMacNumber = 0 status = 0 status = ffffffff
-----
Is is erroneous? Is there some troubleshooting guide in the documentation ?
Any help is greatly appreciated.
Thanks, Taroon Mandhana
______________________________________________________________ _________________
Alok Kumar
Residence: 3401 Red River St #201 Austin, TX 78705
Office: Dept of Computer Science ACES Building University of Texas Austin, TX 78712
Ph: Home - (512) 472-6443 Office - (512) 232-7883 Fax: (401) 679 8171
Homepage: http://www.cs.utexas.edu/~alok ______________________________________________________________ _________________
Hi, How does one go about writing and compiling additional code for the strong arm, which is the best document to read about development for the strong arm? I basically want to run a periodic process in the strong arm that updates some values. thanks, Sachin Jain Graduate student, computer sciences Univ. of Texas - Austin On Mon, 13 Nov 2000, Heaton, Eric D wrote:
Just for some basic setup info:
There are two documents (which should be found on the Developer's Workbench CD) which are invaluable in setting up the Eval System and running the reference designs, the Evaluation System User's Guide and the Example Software User's Guide.
There is information sepcific to loading VxWorks without using Tornado in Section 2.5.6 in the Evaluation System User's Guide, but please read through the rest of the document for general setup information.
-----Original Message----- From: Varnell, Frank [mailto:frank.varnell@intel.com] Sent: Monday, November 13, 2000 12:06 PM To: 'Alok Kumar'; Kelley Jr, Patrick T Cc: 'Taroon Mandhana'; ixp1200@CS.Princeton.EDU Subject: RE: VxWorks on IXP
The vxworks_gig image includes the RTM netapp application. The only thing you would then use Tornado for is to have a shell. The developers didn't use a serial port shell, so you have to buy or obtain an eval Tornado for ARM (version 2.0 NOT 2.0.1) to connect to the target if you need a shell. To be more specific, set up your eval card to boot vxworks via the instructions provided with your boad. Then set the vxworks parameters to load vxworks_gig. Thats all you have to do. Packets will be routed according to the compiled in tables. These comments apply to the 1.0 release of the ixp eval.
-----Original Message----- From: Alok Kumar [mailto:alok@cs.utexas.edu] Sent: Sunday, November 12, 2000 7:46 AM To: Kelley Jr, Patrick T Cc: 'Taroon Mandhana'; ixp1200@CS.Princeton.EDU Subject: RE: VxWorks on IXP
How can we run netapp application without tornado? What does netapp application do and how will it affect if we dont run it?
Thanks Alok
On Fri, 10 Nov 2000, Kelley Jr, Patrick T wrote:
1. No. 2. This is fine! The "WDB: Ready." is the key that the image is loaded and you are ready to run.
You should be able to connect with the Workbench no problem now.
(Just make sure you have the NetApp application running on the core.)
Best Regards, Pat ___________________________________ Patrick T. Kelley Technical Marketing Engineer Network Processor Operation - Network Communications Group
Intel Corporation 77 Reed Road HD2-141 Hudson, Massachusetts 01749-2895 patrick.t.kelley.jr@intel.com http://www.intel.com
-----Original Message----- From: Taroon Mandhana [mailto:mandhana@cs.utexas.edu] Sent: Friday, November 10, 2000 3:34 PM To: ixp1200@CS.Princeton.EDU Subject: VxWorks on IXP
Hi,
1. Is tornado a MUST to download the reference designs on the board ?
2. Without Tornado, I tried downloading the default VxWorks image ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into the errors. Here is how the output looks like
Attached TCP/IP interface to eeE0. Attaching network interface lo0... done. o
Loading... 8488 + 14136 + 228816 Starting at 0x1000...
BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04
Early serial debug initialized muxDevLoad failed for device entry 0! Attached TCP/IP interface to eeE unit 0 Attaching network interface lo0... done. 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address NFS client support not included.
VxWorks
Copyright 1984-1998 Wind River Systems, Inc.
CPU: Intel ixp1200eb - ARM IXP1200 VxWorks: 5.4 BSP version1.2/1 Creation date: May 31 2000 WDB: Ready.
STATUS OF intConnect = 0 BigMacDriver CTOR OctalMacNumber = 0 status = 0 status = ffffffff
-----
Is is erroneous? Is there some troubleshooting guide in the documentation ?
Any help is greatly appreciated.
Thanks, Taroon Mandhana
______________________________________________________________ _________________
Alok Kumar
Residence: 3401 Red River St #201 Austin, TX 78705
Office: Dept of Computer Science ACES Building University of Texas Austin, TX 78712
Ph: Home - (512) 472-6443 Office - (512) 232-7883 Fax: (401) 679 8171
Homepage: http://www.cs.utexas.edu/~alok ______________________________________________________________ _________________
participants (2)
-
Heaton, Eric D -
Sachin Jain