[chuck-users] chuck --probe doesn't find USB midiman keyboard?

[Robert Poor]

Problem solved: I have a Oxygen8, which DOES require a driver for OS  
X.  For the curious, the driver can be found under the "Legacy"  
category on the m-audio site:
	http://www.m-audio.com/index.php?do=support.drivers&f=848
Downloaded, installed, rebooted.  chuck --probe now all happy.

- r

On 26 Jan 2009, at 22:20, Robert Poor wrote:

> I take it back -- the Oxygen 8 v2 is "class compliant and does not  
> require driver support for OS X".  But the legacy Oxygen8 (which I  
> have) has a legacy driver.  I'm installing it and hope that it will  
> work...
>
> - r
>
> On 26 Jan 2009, at 19:19, Rogan Carr wrote:
>
>> I think I used one of these once, but I had to use some special  
>> driver
>> from M-Audio.  Have you searched for a driver?
>>
>> Rogan
>>
>> On Mon, Jan 26, 2009 at 8:24 PM, Robert Poor <rdpoor at gmail.com>  
>> wrote:
>>> [insert gratuitous ravingly happy chuck comment here]
>>>
>>> I'm a brand new user, so this may be a simple cockpit error.
>>>
>>> I've plugged in a midiman "oxygen 8" clavier keyboard into my Mac  
>>> Powerbook
>>> G4.  The Mac recognizes the clavier keyboard in System Profiler...
>>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
>>> =-=-=
>>> Vendor-Specific Device:
>>> Product ID:   0x1014
>>> Vendor ID:    0x0763  (M-Audio)
>>> Version:      0.01
>>> Speed:        Up to 12 Mb/sec
>>> Location ID:  0x1b100000
>>> Current Available (mA):       500
>>> Current Required (mA):        Unknown (Device has not been  
>>> configured)
>>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
>>> =-=-=
>>> ... but chuck --probe does not:
>>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
>>> =-=-=
>>> [poorbook15-5:chuck-1.2.1.2-exe/examples/midi] r% chuck --probe
>>> [chuck]: found 1 device(s) ...
>>> [chuck]: ------( chuck -- dac1 )---------------
>>> [chuck]: device name = "Apple: Built-in Audio"
>>> [chuck]: probe [success] ...
>>> [chuck]: # output channels = 2
>>> [chuck]: # input channels  = 2
>>> [chuck]: # duplex Channels = 2
>>> [chuck]: default device = YES
>>> [chuck]: natively supported data formats:
>>> [chuck]:    8-bit int
>>> [chuck]:   16-bit int
>>> [chuck]:   24-bit int
>>> [chuck]:   32-bit int
>>> [chuck]:   32-bit float
>>> [chuck]:   64-bit float
>>> [chuck]: supported sample rates:
>>> [chuck]:   32000 Hz
>>> [chuck]:   44100 Hz
>>> [chuck]:   48000 Hz
>>> [chuck]:
>>> [chuck]: ------( chuck -- 0 MIDI inputs )------
>>> [chuck]:
>>> [chuck]: ------( chuck -- 0 MIDI outputs )-----
>>> [chuck]:
>>> [poorbook15-5:chuck-1.2.1.2-exe/examples/midi] r%
>>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 
>>> =-=-=
>>> Any ideas what's required to get Chuck to honor the USB / Midi  
>>> keyboard?
>>>
>>> Thanks.
>>>
>>> - Rob
>>> _______________________________________________
>>> chuck-users mailing list
>>> chuck-users at lists.cs.princeton.edu
>>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>