[chuck-users] Multiple Output

[Patrick Guido]

thank for reply. I did this http://dpaste.com/219718/ but it doesn't work :(

I ran it with ./chuck --in8 --out8


2010/7/19 Stefan Blixt <stefan.blixt at gmail.com>

> Yes. For my MOTU soundcard it took a bit of tinkering to get it right.
> Here's an example of a command line:
>
> chuck  --adc4 --in4 --out8
>
> This means that I'm using device number 4 (adc), with 4 inputs and 8
> outputs.
>
> After that you can write like this in you ChucK app:
>
> SinOsc s => dac.chan(3); // send sine wave to the fourth mono output
>
> Note that you'll have to take care of stereo if you want it:
>
> adc.chan(0) => LPF filterLeft => dac.chan(0);
> adc.chan(1) => LPF filterRight => dac.chan(1);
>
> The tinkering bit with MOTU is that all combinations of numbers of inputs
> and outputs don't work. For instance --in3 --out8 will have the whole thing
> go bananas, with weird sound being outputted. If you don't use a MOTU card
> there's a good chance you won't have this problem.
>
> /Stefan
>
> 2010/7/19 Patrick Guido <patrick.arminio at gmail.com>
>
>>  Hi, I've a sound card with 8 outputs (4 left and 4 right) and I want to
>> send different audio signals to each output.
>>
>> Is this possible with chuck?
>>
>> Thanks
>>
>> --
>> Patrick Guido Arminio
>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>
>>
>
>
> --
> Release me, insect, or I will destroy the Cosmos!
>
> _______________________________________________
> chuck-users mailing list
> chuck-users at lists.cs.princeton.edu
> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>
>


-- 
Patrick Guido Arminio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.cs.princeton.edu/pipermail/chuck-users/attachments/20100719/84e45886/attachment.html>