[chuck-users] Newbie troubleshooting Mac/Windows

Wed Mar 24 17:51:27 EDT 2021

Tim - one last thought.  If you've mixed operating modes of chuck,
sometimes elevated, sometimes regular, it's possible (grasping for straws
here), that things have gotten into a bad state. As a general rule, you
should never need to run chuck in elevated permissions mode.  (at least in
my windows experience).  If this were to be the problem, then uninstalling,
then re-installing might help.  After a fresh install, you'd want to take
care to not run chuck in elevated permissions mode.

On Wed, Mar 24, 2021 at 2:48 PM Dana Batali <dana.batali at gmail.com> wrote:

> Tim - here's a subset of the same dump but from my machine.
> One difference between mine and yours is that yours says this:
>
> [chuck]:(3:SEVERE): real-time watchdog counter-measure activating...
>
> and mine doesn't.  I'm outta my depth at this point so perhaps a chuck
> guru can chime in?
>
> good luck!
>
>
> [chuck]:(3:SEVERE): starting real-time watch dog processs...
> [chuck]:(5:INFORM):  | watchdog timeout: 0.500000::second
> [chuck]:(5:INFORM):  | watchdog thread priority: 2
> [chuck]:(5:INFORM):  | watchdog countermeasure priority: -2
> 0.000000 :(time)
> 44100.000000 :(time)
> 88200.000000 :(time)
> 132300.000000 :(time)
> [chuck]: cleaning up...
> [chuck]:(3:SEVERE): stopping real-time watch dog process...
> [chuck]:(5:INFORM): detaching all resources...
> [chuck]:(5:INFORM):  | shutting down HID...
> [chuck]:(5:INFORM):  | shutting down serial devices
>
>
>
> On Wed, Mar 24, 2021 at 2:33 PM Tim Burgess <tim at raisedbar.net> wrote:
>
>> Hi,
>>
>>
>>
>> No joy with demo0.ck, I’m afraid. I tried it with and without having
>> given chuck.exe admin permissions within an elevated cmd, just in case.
>>
>>
>>
>> It’s interesting that it’s trying to access c:\program files\chuck\ at
>> one point, but this message appears to be just informational – my
>> installation is within c:\program files (x86)\chuck.
>>
>>
>>
>> Here’s the dump:
>>
>>
>>
>> [chuck]:(2:SYSTEM): setting log level to: 5 (INFORM)...
>>
>> [chuck]:(2:SYSTEM): setting log level to: 5 (INFORM)...
>>
>> [chuck]:(2:SYSTEM): initializing virtual machine...
>>
>> [chuck]:(2:SYSTEM):  | locking down special objects...
>>
>> [chuck]:(2:SYSTEM):  | allocating shreduler...
>>
>> [chuck]:(2:SYSTEM):  | allocating messaging buffers...
>>
>> [chuck]:(2:SYSTEM): initializing compiler...
>>
>> [chuck]:(3:SEVERE):  | initializing type checker...
>>
>> [chuck]:(3:SEVERE):  |  | adding base classes...
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'object'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'array'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'string'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'ugen'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'uanablob'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'uana'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'shred'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'event'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'io'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'fileio'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'chout'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'cherr'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'vec3' (primitive)
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'vec4' (primitive)
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'class'
>>
>> [chuck]:(3:SEVERE):  | initializing emitter...
>>
>> [chuck]:(3:SEVERE):  | loading built-in modules...
>>
>> [chuck]:(3:SEVERE):  |  | module osc...
>>
>> [chuck]:(3:SEVERE):  |  | module xxx...
>>
>> [chuck]:(3:SEVERE):  |  | module filter...
>>
>> [chuck]:(3:SEVERE):  |  | module STK...
>>
>> [chuck]:(3:SEVERE):  |  | module xform...
>>
>> [chuck]:(3:SEVERE):  |  | module extract...
>>
>> [chuck]:(3:SEVERE):  |  | class 'machine'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'std'...
>>
>> [chuck]:(5:INFORM):  |  | initializing KBHitManager...
>>
>> [chuck]:(3:SEVERE):  |  | class 'math'...
>>
>> [chuck]:(5:INFORM):  |  | starting kb loop...
>>
>> [chuck]:(3:SEVERE):  |  | class 'opsc'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'RegEx'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'SerialIO'
>>
>> [chuck]:(3:SEVERE):  | loading chugins
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory
>> 'C:\WINDOWS\system32\ChucK'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory 'C:\Program
>> Files\ChucK\chugins'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(5:INFORM):  |  | examining directory 'C:\Program Files
>> (x86)\ChucK\chugins' for chugins
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ABSaturator.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'AmbPan.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Bitcrusher.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Elliptic.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ExpDelay.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ExpEnv.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'FIR.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'FoldbackSaturator.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'GVerb.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'KasFilter.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'MagicSine.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Mesh2D.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Multicomb.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Overdrive.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PanN.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PitchTrack.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PowerADSR.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Sigmund.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Spectacle.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WinFuncEnv.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WPDiodeLadder.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WPKorg35.chug'
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory 'C:\Program
>> Files\ChucK\chugins'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(2:SYSTEM): type dependency resolution: MANUAL
>>
>> [chuck]:(2:SYSTEM): initializing synthesis engine...
>>
>> [chuck]:(3:SEVERE):  | initializing 'dac'...
>>
>> [chuck]:(3:SEVERE):  | initializing 'adc'...
>>
>> [chuck]:(3:SEVERE):  | initializing 'blackhole'...
>>
>> [chuck]:(3:SEVERE): pre-loading ChucK libs...
>>
>> [chuck]:(2:SYSTEM): starting listener on port: 8888...
>>
>> [chuck]:(2:SYSTEM): initializing audio I/O...
>>
>> [chuck]:(2:SYSTEM):  | probing 'real-time' audio subsystem...
>>
>> [chuck]:(3:SEVERE):  | allocating buffers for 512 x 2 samples...
>>
>> [chuck]:(2:SYSTEM):  | real-time audio: YES
>>
>> [chuck]:(2:SYSTEM):  | mode: CALLBACK
>>
>> [chuck]:(2:SYSTEM):  | sample rate: 44100
>>
>> [chuck]:(2:SYSTEM):  | buffer size: 512
>>
>> [chuck]:(2:SYSTEM):  | num buffers: 8
>>
>> [chuck]:(2:SYSTEM):  | adc: 0 dac: 0
>>
>> [chuck]:(2:SYSTEM):  | adaptive block processing: 0
>>
>> [chuck]:(2:SYSTEM):  | channels in: 2 out: 2
>>
>> [chuck]:(3:SEVERE): starting compilation...
>>
>> [chuck]:(2:SYSTEM): running main loop...
>>
>> [chuck]:(3:SEVERE):  | virtual machine running...
>>
>> [chuck]:(3:SEVERE): starting real-time watch dog processs...
>>
>> [chuck]:(5:INFORM):  | watchdog timeout: 0.500000::second
>>
>> [chuck]:(5:INFORM):  | watchdog thread priority: 2
>>
>> [chuck]:(5:INFORM):  | watchdog countermeasure priority: -2
>>
>> [chuck]:(3:SEVERE): real-time watchdog counter-measure activating...
>>
>>
>>
>> *From:* chuck-users-bounces at lists.cs.princeton.edu <
>> chuck-users-bounces at lists.cs.princeton.edu> *On Behalf Of *Dana Batali
>> *Sent:* 24 March 2021 18:58
>> *To:* ChucK Users Mailing List <chuck-users at lists.cs.princeton.edu>
>> *Subject:* Re: [chuck-users] Newbie troubleshooting Mac/Windows
>>
>>
>>
>> Tim - I'm not sure I see any issues with this dump.  Chuck's -v reporting
>> is a bit misleading, it uses words like SEVERE to indicate higher priority
>> debugging messages. These don't indicate that you have severe problems.
>> Other than not hearing sound.
>>
>>
>>
>> As for your Ctrl+C issue, on windows I feel that the interrupt-based
>> cleanup has some known stability issues.  When terminating this way I see
>> segmentation violations or other crashy messages around 50% of the time.
>>
>>
>>
>> If you can run a test file like "examples/basic/demo0.ck", it might be
>> worth testing whether it runs to completion. This example just prints out
>> some messages and exits after 5 seconds.  If that test runs smoothly we're
>> back, I think, to the question of why do you hear no sound rather than
>> wondering whether chuck is seriously botched.
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Mar 24, 2021 at 11:41 AM Tim Burgess <tim at raisedbar.net> wrote:
>>
>> OK, thanks for -v. Here’s the output and there’s some obvious problems:
>>
>>
>>
>> [chuck]:(2:SYSTEM): setting log level to: 5 (INFORM)...
>>
>> [chuck]:(2:SYSTEM): setting log level to: 5 (INFORM)...
>>
>> [chuck]:(2:SYSTEM): initializing virtual machine...
>>
>> [chuck]:(2:SYSTEM):  | locking down special objects...
>>
>> [chuck]:(2:SYSTEM):  | allocating shreduler...
>>
>> [chuck]:(2:SYSTEM):  | allocating messaging buffers...
>>
>> [chuck]:(2:SYSTEM): initializing compiler...
>>
>> [chuck]:(3:SEVERE):  | initializing type checker...
>>
>> [chuck]:(3:SEVERE):  |  | adding base classes...
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'object'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'array'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'string'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'ugen'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'uanablob'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'uana'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'shred'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'event'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'io'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'fileio'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'chout'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'cherr'
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'vec3' (primitive)
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'vec4' (primitive)
>>
>> [chuck]:(3:SEVERE):  |  |  | class 'class'
>>
>> [chuck]:(3:SEVERE):  | initializing emitter...
>>
>> [chuck]:(3:SEVERE):  | loading built-in modules...
>>
>> [chuck]:(3:SEVERE):  |  | module osc...
>>
>> [chuck]:(3:SEVERE):  |  | module xxx...
>>
>> [chuck]:(3:SEVERE):  |  | module filter...
>>
>> [chuck]:(3:SEVERE):  |  | module STK...
>>
>> [chuck]:(3:SEVERE):  |  | module xform...
>>
>> [chuck]:(3:SEVERE):  |  | module extract...
>>
>> [chuck]:(3:SEVERE):  |  | class 'machine'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'std'...
>>
>> [chuck]:(5:INFORM):  |  | initializing KBHitManager...
>>
>> [chuck]:(3:SEVERE):  |  | class 'math'...
>>
>> [chuck]:(5:INFORM):  |  | starting kb loop...
>>
>> [chuck]:(3:SEVERE):  |  | class 'opsc'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'RegEx'...
>>
>> [chuck]:(3:SEVERE):  |  | class 'SerialIO'
>>
>> [chuck]:(3:SEVERE):  | loading chugins
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory
>> 'C:\WINDOWS\system32\ChucK'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory 'C:\Program
>> Files\ChucK\chugins'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(5:INFORM):  |  | examining directory 'C:\Program Files
>> (x86)\ChucK\chugins' for chugins
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ABSaturator.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'AmbPan.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Bitcrusher.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Elliptic.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ExpDelay.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'ExpEnv.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'FIR.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'FoldbackSaturator.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'GVerb.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'KasFilter.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'MagicSine.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Mesh2D.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Multicomb.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Overdrive.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PanN.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PitchTrack.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'PowerADSR.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Sigmund.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'Spectacle.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WinFuncEnv.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WPDiodeLadder.chug'
>>
>> [chuck]:(3:SEVERE):  |  | loading chugin 'WPKorg35.chug'
>>
>> [chuck]:(5:INFORM):  |  | unable to open directory 'C:\Program
>> Files\ChucK\chugins'...
>>
>> [chuck]:(5:INFORM):  |  | (ignoring for chugins...)
>>
>> [chuck]:(2:SYSTEM): type dependency resolution: MANUAL
>>
>> [chuck]:(2:SYSTEM): initializing synthesis engine...
>>
>> [chuck]:(3:SEVERE):  | initializing 'dac'...
>>
>> [chuck]:(3:SEVERE):  | initializing 'adc'...
>>
>> [chuck]:(3:SEVERE):  | initializing 'blackhole'...
>>
>> [chuck]:(3:SEVERE): pre-loading ChucK libs...
>>
>> [chuck]:(2:SYSTEM): starting listener on port: 8888...
>>
>> [chuck]:(2:SYSTEM): initializing audio I/O...
>>
>> [chuck]:(2:SYSTEM):  | probing 'real-time' audio subsystem...
>>
>> [chuck]:(3:SEVERE):  | allocating buffers for 512 x 2 samples...
>>
>> [chuck]:(2:SYSTEM):  | real-time audio: YES
>>
>> [chuck]:(2:SYSTEM):  | mode: CALLBACK
>>
>> [chuck]:(2:SYSTEM):  | sample rate: 44100
>>
>> [chuck]:(2:SYSTEM):  | buffer size: 512
>>
>> [chuck]:(2:SYSTEM):  | num buffers: 8
>>
>> [chuck]:(2:SYSTEM):  | adc: 0 dac: 0
>>
>> [chuck]:(2:SYSTEM):  | adaptive block processing: 0
>>
>> [chuck]:(2:SYSTEM):  | channels in: 2 out: 2
>>
>> [chuck]:(3:SEVERE): starting compilation...
>>
>> [chuck]:(2:SYSTEM): running main loop...
>>
>> [chuck]:(3:SEVERE):  | virtual machine running...
>>
>> [chuck]:(3:SEVERE): starting real-time watch dog processs...
>>
>> [chuck]:(5:INFORM):  | watchdog timeout: 0.500000::second
>>
>> [chuck]:(5:INFORM):  | watchdog thread priority: 2
>>
>> [chuck]:(5:INFORM):  | watchdog countermeasure priority: -2
>>
>> [chuck]:(3:SEVERE): real-time watchdog counter-measure activating...
>>
>>
>>
>> I pressed Ctrl+C then got:
>>
>>
>>
>> [chuck]: cleaning up...
>>
>> [chuck]:(3:SEVERE): stopping real-time watch dog process...
>>
>>
>>
>> Boom! at this point. I have to Alt+F4 to kill off the command prompt’s
>> window.
>>
>>
>>
>> Cheers.
>>
>>
>>
>> Tim
>>
>>
>>
>> *From:* chuck-users-bounces at lists.cs.princeton.edu <
>> chuck-users-bounces at lists.cs.princeton.edu> *On Behalf Of *Dana Batali
>> *Sent:* 24 March 2021 17:57
>> *To:* ChucK Users Mailing List <chuck-users at lists.cs.princeton.edu>
>> *Subject:* Re: [chuck-users] Newbie troubleshooting Mac/Windows
>>
>>
>>
>> Hi Tim - on my windows machine, I see two sections, one for Microsoft
>> Store apps and one for Desktop apps.
>>
>>
>>
>> In my case, all the microsoft apps are disallowed. There are 20-ish
>> buttons all indicating Off.
>>
>>
>>
>> I've allowed all desktop apps access via a single on-off button, it
>> indicates On.
>>
>>
>>
>> The fact that you reported that chuck.exe had registered access to the
>> microphone makes me think that that isn't your problem.
>>
>>
>>
>> I think I missed the part of your report that indicated that ctrl-c
>> wasn't functioning.  It raises the question of what state chuck is actually
>> in.
>>
>> Perhaps if you try:  chuck -v yourtest.ck, the resulting dump will
>> illuminate the mystery?
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Mar 24, 2021 at 10:43 AM Tim Burgess <tim at raisedbar.net> wrote:
>>
>> Hi,
>>
>>
>>
>> Unfortunately, going through my DAC options hasn’t helped, as I suspected.
>>
>>
>>
>> An odd question, but when you go into the dialog to change access to the
>> microphone and you navigate to the list of applications, including
>> chuck.exe, are those items visually checked? I ask because I’m blind and
>> use a screen reader to interact with my computer – sometimes we don’t get
>> all the feedback from a UI element that we might need and I’m wondering if
>> that’s the case here.
>>
>>
>>
>> Cheers.
>>
>>
>>
>> Tim
>>
>>
>>
>> *From:* chuck-users-bounces at lists.cs.princeton.edu <
>> chuck-users-bounces at lists.cs.princeton.edu> *On Behalf Of *Tim Burgess
>> *Sent:* 24 March 2021 17:13
>> *To:* 'ChucK Users Mailing List' <chuck-users at lists.cs.princeton.edu>
>> *Subject:* Re: [chuck-users] Newbie troubleshooting Mac/Windows
>>
>>
>>
>> OK, sounds fair enough and the thought had crossed my mind, but I haven’t
>> had another chance to play since posting.
>>
>>
>>
>> I’ll give it a try, but my gut says that it’ll fail given that Ctrl+C
>> doesn’t cause my simple .ck file to quit – control never returns to the
>> command prompt.
>>
>>
>>
>> Really appreciate the help anyhow and I’ll post back if I find the
>> solution.
>>
>>
>>
>>
>>
>> *Cheers.*
>>
>>
>>
>> *Tim*
>>
>>
>>
>> *From:* chuck-users-bounces at lists.cs.princeton.edu <
>> chuck-users-bounces at lists.cs.princeton.edu> *On Behalf Of *Dana Batali
>> *Sent:* 24 March 2021 16:26
>> *To:* ChucK Users Mailing List <chuck-users at lists.cs.princeton.edu>
>> *Subject:* Re: [chuck-users] Newbie troubleshooting Mac/Windows
>>
>>
>>
>> Tim - the only other thing I can think of is that since you have multiple
>> audio devices, the one you are listening to isn't the one that chuck is
>> producing sound on.  If this is the case you have two options:
>>
>>
>>
>> 1. tell chuck to try one of the other outputs via the -dac0,1,2
>> command-line
>>
>> 2. use windows sound settings to select an alternate default sound device.
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Mar 24, 2021 at 3:06 AM Tim Burgess <tim at raisedbar.net> wrote:
>>
>> Hi,
>>
>>
>>
>> Thanks for the suggestion, but chuck shows up in the list of applications
>> that accessed the microphone and access is turned on. I don’t know if it
>> helps, but here’s the output from chuck –probe:
>>
>>
>>
>> [chuck]: found 5 device(s) ...
>>
>> [chuck]: ------( audio device: 1 )---------------
>>
>> [chuck]: device name = "Default Device"
>>
>> [chuck]: probe [success] ...
>>
>> [chuck]: # output channels = 2
>>
>> [chuck]: # input channels  = 2
>>
>> [chuck]: # duplex Channels = 2
>>
>> [chuck]: default output = YES
>>
>> [chuck]: default input = YES
>>
>> [chuck]: natively supported data formats:
>>
>> [chuck]:    8-bit int
>>
>> [chuck]:   16-bit int
>>
>> [chuck]: supported sample rates:
>>
>> [chuck]:   4000 Hz
>>
>> [chuck]:   5512 Hz
>>
>> [chuck]:   8000 Hz
>>
>> [chuck]:   9600 Hz
>>
>> [chuck]:   11025 Hz
>>
>> [chuck]:   16000 Hz
>>
>> [chuck]:   22050 Hz
>>
>> [chuck]:   32000 Hz
>>
>> [chuck]:   44100 Hz
>>
>> [chuck]:   48000 Hz
>>
>> [chuck]:   88200 Hz
>>
>> [chuck]:   96000 Hz
>>
>> [chuck]:   176400 Hz
>>
>> [chuck]:   192000 Hz
>>
>> [chuck]:
>>
>> [chuck]: ------( audio device: 2 )---------------
>>
>> [chuck]: device name = "Speakers (Cirrus Logic CS4208 (AB 128))"
>>
>> [chuck]: probe [success] ...
>>
>> [chuck]: # output channels = 2
>>
>> [chuck]: # input channels  = 0
>>
>> [chuck]: # duplex Channels = 0
>>
>> [chuck]: default output = NO
>>
>> [chuck]: default input = NO
>>
>> [chuck]: natively supported data formats:
>>
>> [chuck]:    8-bit int
>>
>> [chuck]:   16-bit int
>>
>> [chuck]: supported sample rates:
>>
>> [chuck]:   4000 Hz
>>
>> [chuck]:   5512 Hz
>>
>> [chuck]:   8000 Hz
>>
>> [chuck]:   9600 Hz
>>
>> [chuck]:   11025 Hz
>>
>> [chuck]:   16000 Hz
>>
>> [chuck]:   22050 Hz
>>
>> [chuck]:   32000 Hz
>>
>> [chuck]:   44100 Hz
>>
>> [chuck]:   48000 Hz
>>
>> [chuck]:   88200 Hz
>>
>> [chuck]:   96000 Hz
>>
>> [chuck]:   176400 Hz
>>
>> [chuck]:   192000 Hz
>>
>> [chuck]:
>>
>> [chuck]: ------( audio device: 3 )---------------
>>
>> [chuck]: device name = "Digital Audio (S/PDIF) (Cirrus Logic CS4208 (AB
>> 128))"
>>
>> [chuck]: probe [success] ...
>>
>> [chuck]: # output channels = 2
>>
>> [chuck]: # input channels  = 0
>>
>> [chuck]: # duplex Channels = 0
>>
>> [chuck]: default output = NO
>>
>> [chuck]: default input = NO
>>
>> [chuck]: natively supported data formats:
>>
>> [chuck]:    8-bit int
>>
>> [chuck]:   16-bit int
>>
>> [chuck]: supported sample rates:
>>
>> [chuck]:   4000 Hz
>>
>> [chuck]:   5512 Hz
>>
>> [chuck]:   8000 Hz
>>
>> [chuck]:   9600 Hz
>>
>> [chuck]:   11025 Hz
>>
>> [chuck]:   16000 Hz
>>
>> [chuck]:   22050 Hz
>>
>> [chuck]:   32000 Hz
>>
>> [chuck]:   44100 Hz
>>
>> [chuck]:   48000 Hz
>>
>> [chuck]:   88200 Hz
>>
>> [chuck]:   96000 Hz
>>
>> [chuck]:   176400 Hz
>>
>> [chuck]:   192000 Hz
>>
>> [chuck]:
>>
>> [chuck]: ------( audio device: 4 )---------------
>>
>> [chuck]: device name = "Microphone (Kinoni Audio Source)"
>>
>> [chuck]: probe [success] ...
>>
>> [chuck]: # output channels = 0
>>
>> [chuck]: # input channels  = 2
>>
>> [chuck]: # duplex Channels = 0
>>
>> [chuck]: default output = NO
>>
>> [chuck]: default input = NO
>>
>> [chuck]: natively supported data formats:
>>
>> [chuck]:    8-bit int
>>
>> [chuck]:   16-bit int
>>
>> [chuck]: supported sample rates:
>>
>> [chuck]:   11025 Hz
>>
>> [chuck]:   22050 Hz
>>
>> [chuck]:   44100 Hz
>>
>> [chuck]:   96000 Hz
>>
>> [chuck]:
>>
>> [chuck]: ------( audio device: 5 )---------------
>>
>> [chuck]: device name = "Internal Microphone (Cirrus Logic CS4208 (AB
>> 128))"
>>
>> [chuck]: probe [success] ...
>>
>> [chuck]: # output channels = 0
>>
>> [chuck]: # input channels  = 2
>>
>> [chuck]: # duplex Channels = 0
>>
>> [chuck]: default output = NO
>>
>> [chuck]: default input = NO
>>
>> [chuck]: natively supported data formats:
>>
>> [chuck]:    8-bit int
>>
>> [chuck]:   16-bit int
>>
>> [chuck]: supported sample rates:
>>
>> [chuck]:   11025 Hz
>>
>> [chuck]:   22050 Hz
>>
>> [chuck]:   44100 Hz
>>
>> [chuck]:   96000 Hz
>>
>> [chuck]:
>>
>> [chuck]:
>>
>> [chuck](via RtMidi): RtMidiIn::initialize: no MIDI input devices
>> currently available.
>>
>> [chuck]: ------( chuck -- 0 MIDI inputs )------
>>
>> [chuck]:
>>
>> [chuck]: ------( chuck -- 1 MIDI outputs )-----
>>
>> [chuck]:     [0] : "Microsoft GS Wavetable Synth"
>>
>> [chuck]:
>>
>> [chuck]: ------( chuck -- 1 mouse device )------
>>
>> [chuck]:     [0] : "Mouse"
>>
>> [chuck]:
>>
>> [chuck]: ------( chuck -- 1 keyboard device )------
>>
>> [chuck]:     [0] : "Keyboard"
>>
>>
>>
>> *Take care and stay safe.*
>>
>>
>>
>> *Tim*
>>
>>
>>
>> *From:* chuck-users-bounces at lists.cs.princeton.edu <
>> chuck-users-bounces at lists.cs.princeton.edu> *On Behalf Of *Dana Batali
>> *Sent:* 23 March 2021 17:43
>> *To:* ChucK Users Mailing List <chuck-users at lists.cs.princeton.edu>
>> *Subject:* Re: [chuck-users] Newbie troubleshooting Mac/Windows
>>
>>
>>
>> It's possible chuck is waiting for access to your microphone and windows
>> 10 defaults to disallowing access.
>>
>> You can grant access to the microphone via a setting called "Allow apps
>> to access your microphone".
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>
>> _______________________________________________
>> chuck-users mailing list
>> chuck-users at lists.cs.princeton.edu
>> https://lists.cs.princeton.edu/mailman/listinfo/chuck-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.cs.princeton.edu/pipermail/chuck-users/attachments/20210324/78b529c5/attachment-0001.html>