[ixp1200] Re: problems with octmac.o
Ricardo Camarena Ramos
camarena at itesm.mx
Fri Oct 22 14:45:47 EDT 2004
Hi Shweta.
I had several problems when trying to "see" the ports. I don't remember
I had that problem with octmac.o but I had with pciDg.o on the Linux
host. What I did was to recompile the module as follows:
cd /usr/src/linux
edit Makefile and change the EXTRAVERSION=xxxx
Where xxxx is the kernel version you are booting up in the Linux host.
For example, if your kernel is 2.4.17-3smp put EXTRAVERSION=-3smp
make mrproper
make oldconfig
make dep
cd /mnt/cdrom/ENP-2505_Driver
rpm -recompile boot_drv-2.0-1.src.rpm
cd /opt/ixasdk/enp-2505/bin
insmod pciDg.o
After that I got a warning: tainted kernel. However the module loads OK.
By the way, if you have a BV you must have patched the installation to
work correctly with the MACs (this includes the octmac.o module). I
prepared a log when I did it. Please look at "Corrections specific for
Brivadeli card as specified by Joel Schuetze from Intel" section on
http://webdiee.cem.itesm.mx/web2/comunicaciones/proyectos/LNX 2004-09
Installation log for Brivadeli card IXP1200 V3.txt
You can find the files specified on it in:
"Anexo a guia V2.doc" which is located in the same page.
Hope it helps.
ixp1200-request at lists.cs.princeton.edu wrote:
>Send ixp1200 mailing list submissions to
> ixp1200 at lists.cs.princeton.edu
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.cs.princeton.edu/mailman/listinfo/ixp1200
>or, via email, send a message with subject or body 'help' to
> ixp1200-request at lists.cs.princeton.edu
>
>You can reach the person managing the list at
> ixp1200-owner at lists.cs.princeton.edu
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of ixp1200 digest..."
>
>
>------------------------------------------------------------------------
>
>Today's Topics:
>
> 1. problems with octmac.o (Shweta Rao)
>
>
>
> ------------------------------------------------------------------------
>
> Subject:
> [ixp1200] problems with octmac.o
> From:
> Shweta Rao <shwetar at gmail.com>
> Date:
> Thu, 21 Oct 2004 15:18:03 -0700
> To:
> ixp1200 at lists.cs.princeton.edu
>
>
>Hi,
>
>I tried to insmod octmac.o to set the mac addresses
>
>insmod octmac.o mac0="00:00:ca:fe:ba:be" and so on
>
>i go this error
>unresolved symbol get_board_config
>Please help.
>shweta
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>ixp1200 mailing list
>ixp1200 at lists.cs.princeton.edu
>https://lists.cs.princeton.edu/mailman/listinfo/ixp1200
>
>
--
Ing. Ricardo Camarena Ramos camarena at itesm.mx
Asistente de Investigación
Departamento de Ingeniería Eléctrica y Electrónica
Tecnológico de Monterrey, Campus Estado de México
Teléfono: (5255) 5864.5555 extensión: 3016.
enlace-intercampus: 80.236.3016
http://www.itesm.mx
http://webdiee.cem.itesm.mx/web2
El contenido de este mensaje de datos no se considera oferta, propuesta o acuerdo, sino hasta que sea confirmado en documento por escrito que contenga la firma autógrafa del apoderado legal del ITESM. El contenido de este mensaje de datos es confidencial y se entiende dirigido y para uso exclusivo del destinatario, por lo que no podrá distribuirse y/o difundirse por ningún medio sin la previa autorización del emisor original. Si usted no es el destinatario, se le prohíbe su utilización total o parcial para cualquier fin.
More information about the ixp1200
mailing list