bridalveil+linux+peth+L3f

Hi, I'm trying to run/debug the L3 forwarding reference design on an Bridalveil board (with driver ver. 1.4). The ue.o,peth.o,octmac.o,rs_udebug and rtmapp files are from IXA Kit ver 2.01 (as the ue.o supplied with the ramdisk conflicts with the latest rtmapp supplied with SDK 2.01). After starting the hardware debug from the ixp1200 developer workbench in about 5 seconds I either get a frozen bridalveil board (" Get Microengine Status failed due to remote service timeout. ... To proceed, stop debugging and reboot the chip.") and a frozen hub or an error from the board "Bad descriptor fffffb00, dropping outgoing packet pethFreeDescriptor: Bad descriptor fffffb00" and after a minute or so the board is frozen and the hub in which is plugged-in is frozen too. Could you please give me an advice ? Has anybody a working example that uses the L3f reference design ? Thank You -istvan

hi,
Can you give me the configuration of Bridalveil
board.It may help me to analyse the problem.
Ravi
--- Istvan Matyasovszki
Hi,
I'm trying to run/debug the L3 forwarding reference design on an Bridalveil board (with driver ver. 1.4). The ue.o,peth.o,octmac.o,rs_udebug and rtmapp files are from IXA Kit ver 2.01 (as the ue.o supplied with the ramdisk conflicts with the latest rtmapp supplied with SDK 2.01).
After starting the hardware debug from the ixp1200 developer workbench in about 5 seconds I either get a frozen bridalveil board
(" Get Microengine Status failed due to remote service timeout. ... To proceed, stop debugging and reboot the chip.")
and a frozen hub or an error from the board
"Bad descriptor fffffb00, dropping outgoing packet pethFreeDescriptor: Bad descriptor fffffb00"
and after a minute or so the board is frozen and the hub in which is plugged-in is frozen too.
Could you please give me an advice ? Has anybody a working example that uses the L3f reference design ?
Thank You -istvan
__________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/

Hi,
I have
cygmon ver: 2.04
cpu: ixp1200 rev. C0
board: intel pa1104
Dip switches:
SW0201 1 2 3 4
ON ON ON ON
SW1301 1 2 3 4 5 6 7 8
OFF OFF ON ON ON ON ON ON
-istvan
rm> hi,
rm> Can you give me the configuration of Bridalveil
rm> board.It may help me to analyse the problem.
rm> Ravi
rm> --- Istvan Matyasovszki
Hi,
I'm trying to run/debug the L3 forwarding reference design on an Bridalveil board (with driver ver. 1.4). The ue.o,peth.o,octmac.o,rs_udebug and rtmapp files are from IXA Kit ver 2.01 (as the ue.o supplied with the ramdisk conflicts with the latest rtmapp supplied with SDK 2.01).
After starting the hardware debug from the ixp1200 developer workbench in about 5 seconds I either get a frozen bridalveil board
(" Get Microengine Status failed due to remote service timeout. ... To proceed, stop debugging and reboot the chip.")
and a frozen hub or an error from the board
"Bad descriptor fffffb00, dropping outgoing packet pethFreeDescriptor: Bad descriptor fffffb00"
and after a minute or so the board is frozen and the hub in which is plugged-in is frozen too.
Could you please give me an advice ? Has anybody a working example that uses the L3f reference design ?
Thank You -istvan
rm> __________________________________________________ rm> Do You Yahoo!? rm> Yahoo! Tax Center - online filing with TurboTax rm> http://taxes.yahoo.com/

hi,
I wanted to know how many Macs(10/100 or gigs
)are there on the board and which reference design are
u talking about.Check out whether portmap is running
on the target board.
Ravi
--- ravi modgekar
Hi,
I'm trying to run/debug the L3 forwarding reference design on an Bridalveil board (with driver ver. 1.4). The ue.o,peth.o,octmac.o,rs_udebug and rtmapp files are from IXA Kit ver 2.01 (as the ue.o supplied with the ramdisk conflicts with the latest rtmapp supplied with SDK 2.01).
After starting the hardware debug from the ixp1200 developer workbench in about 5 seconds I either get a frozen bridalveil board
(" Get Microengine Status failed due to remote service timeout. ... To proceed, stop debugging and reboot the chip.")
and a frozen hub or an error from the board
"Bad descriptor fffffb00, dropping outgoing
hi, Can you give me the configuration of Bridalveil board.It may help me to analyse the problem. Ravi --- Istvan Matyasovszki
wrote: packet pethFreeDescriptor: Bad descriptor fffffb00"
and after a minute or so the board is frozen and the hub in which is plugged-in is frozen too.
Could you please give me an advice ? Has anybody a working example that uses the L3f reference design ?
Thank You -istvan
__________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/
__________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/

There are 4 - 10/100 Ethernet interfaces and no Gigs ...
Portmap was running all the time as I always mount
some partitions through NFS.
Any other ideas ?
-istvan
rm> hi,
rm> I wanted to know how many Macs(10/100 or gigs
rm> )are there on the board and which reference design are
rm> u talking about.Check out whether portmap is running
rm> on the target board.
rm> Ravi
rm> --- ravi modgekar
Hi,
I'm trying to run/debug the L3 forwarding reference design on an Bridalveil board (with driver ver. 1.4). The ue.o,peth.o,octmac.o,rs_udebug and rtmapp files are from IXA Kit ver 2.01 (as the ue.o supplied with the ramdisk conflicts with the latest rtmapp supplied with SDK 2.01).
After starting the hardware debug from the ixp1200 developer workbench in about 5 seconds I either get a frozen bridalveil board
(" Get Microengine Status failed due to remote service timeout. ... To proceed, stop debugging and reboot the chip.")
and a frozen hub or an error from the board
"Bad descriptor fffffb00, dropping outgoing
hi, Can you give me the configuration of Bridalveil board.It may help me to analyse the problem. Ravi --- Istvan Matyasovszki
wrote: packet pethFreeDescriptor: Bad descriptor fffffb00"
and after a minute or so the board is frozen and the hub in which is plugged-in is frozen too.
Could you please give me an advice ? Has anybody a working example that uses the L3f reference design ?
Thank You -istvan
__________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/
rm> __________________________________________________ rm> Do You Yahoo!? rm> Yahoo! Games - play chess, backgammon, pool and more rm> http://games.yahoo.com/
participants (2)
-
Istvan Matyasovszki
-
ravi modgekar