VxWorks on IXP

Fri Nov 10 16:20:28 EST 2000

1. No.
2. This is fine!  The "WDB: Ready." is the key that the image is loaded and
you are ready to run.

You should be able to connect with the Workbench no problem now.

(Just make sure you have the NetApp application running on the core.)

Best Regards,
Pat
___________________________________
Patrick T. Kelley
Technical Marketing Engineer
Network Processor Operation - Network Communications Group

Intel Corporation
77 Reed Road  HD2-141
Hudson, Massachusetts 01749-2895
patrick.t.kelley.jr at intel.com
http://www.intel.com

 -----Original Message-----
From: 	Taroon Mandhana [mailto:mandhana at cs.utexas.edu] 
Sent:	Friday, November 10, 2000 3:34 PM
To:	ixp1200 at CS.Princeton.EDU
Subject:	VxWorks on IXP

Hi, 

 1. Is tornado a MUST to download the reference designs on the board ?

 2. Without Tornado, I tried downloading the default VxWorks image 
    ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into
the errors. Here is how the output looks like

Attached TCP/IP interface to eeE0.                                  
Attaching network interface lo0... done.                                o

Loading... 8488 + 14136 + 228816                                  
Starting at 0x1000...                     

BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04

Early serial debug initialized
muxDevLoad failed for device entry 0!
Attached TCP/IP interface to eeE unit 0
Attaching network interface lo0... done.
0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address
NFS client support not included.

                 VxWorks

            CPU: Intel ixp1200eb - ARM IXP1200
        VxWorks: 5.4
    BSP version1.2/1
  Creation date: May 31 2000
            WDB: Ready.

STATUS OF intConnect = 0
BigMacDriver CTOR OctalMacNumber = 0
status = 0
status = ffffffff

  -----

  Is is erroneous? Is there some troubleshooting guide in the
documentation ?

  Any help is greatly appreciated.

Thanks,
Taroon Mandhana