VxWorks on IXP

[Alok Kumar]

How can we run netapp application without tornado? What does netapp
application do and how will it affect if we dont run it?

Thanks
Alok

On Fri, 10 Nov 2000, Kelley Jr, Patrick T wrote:

> 1. No.
> 2. This is fine!  The "WDB: Ready." is the key that the image is loaded and
> you are ready to run.
> 
> You should be able to connect with the Workbench no problem now.
> 
> (Just make sure you have the NetApp application running on the core.)
> 
> Best Regards,
> Pat
> ___________________________________
> Patrick T. Kelley
> Technical Marketing Engineer
> Network Processor Operation - Network Communications Group
> 
> Intel Corporation
> 77 Reed Road  HD2-141
> Hudson, Massachusetts 01749-2895
> patrick.t.kelley.jr at intel.com
> http://www.intel.com
> 
> 
>  -----Original Message-----
> From: 	Taroon Mandhana [mailto:mandhana at cs.utexas.edu] 
> Sent:	Friday, November 10, 2000 3:34 PM
> To:	ixp1200 at CS.Princeton.EDU
> Subject:	VxWorks on IXP
> 
> Hi, 
> 
>  1. Is tornado a MUST to download the reference designs on the board ?
>  
>  2. Without Tornado, I tried downloading the default VxWorks image 
>     ixp1200/boardsupport/bin/vp/vxworks_gig on the board and landed into
> the errors. Here is how the output looks like
> 
> Attached TCP/IP interface to eeE0.                                  
> Attaching network interface lo0... done.                                o
> 
> Loading... 8488 + 14136 + 228816                                  
> Starting at 0x1000...                     
> 
> BSP IXP Version: 1.0.1129, built on May 31 2000, 10:28:04
> 
> Early serial debug initialized
> muxDevLoad failed for device entry 0!
> Attached TCP/IP interface to eeE unit 0
> Attaching network interface lo0... done.
> 0x7ffe64 (tRootTask): dc0 - Failed to read ethernet address
> NFS client support not included.
> 
> 
>                  VxWorks
> 
> Copyright 1984-1998  Wind River Systems, Inc.
> 
>             CPU: Intel ixp1200eb - ARM IXP1200
>         VxWorks: 5.4
>     BSP version1.2/1
>   Creation date: May 31 2000
>             WDB: Ready.
> 
> STATUS OF intConnect = 0
> BigMacDriver CTOR OctalMacNumber = 0
> status = 0
> status = ffffffff
> 
>   -----
>  
>   Is is erroneous? Is there some troubleshooting guide in the
> documentation ?
> 
>   Any help is greatly appreciated.
> 
> 
> Thanks,
> Taroon Mandhana
> 
> 
> 
> 

_______________________________________________________________________________

Alok Kumar

Residence:
3401 Red River St #201
Austin, TX 78705

Office:
Dept of Computer Science
ACES Building
University of Texas
Austin, TX 78712

Ph:  Home   - (512) 472-6443
     Office - (512) 232-7883
Fax: (401) 679 8171

Homepage: http://www.cs.utexas.edu/~alok
_______________________________________________________________________________