[ixp1200] Question on enp-2505

[Yong Liu]

According to the ixaedu/ixasdk document you can run following command in
Linux to start the Linux system on board

/opt/ixasdk/enp-2505/bootixp/bootixp

I don't need to run command under the cygwon prompt.

You can follow the sdk manual though it is a little confusing.


----- Original Message ----- 
From: "Feng Tang" <ftan413 at cse.unsw.edu.au>
To: "Brandewie, Dirk J" <dirk.j.brandewie at intel.com>
Cc: <joel.d.schuetze at intel.com>; <ftan413 at cse.unsw.edu.au>;
<ixp1200 at CS.Princeton.EDU>
Sent: Monday, May 26, 2003 12:11 AM
Subject: [ixp1200] Question on enp-2505


> Hello,
>
> Currently, my problem when trying to boot linux is:
>
> After the board entered cygmon, I typed "go" command, then the minicom
> screen show below information:
>
> ******************
>
> cygmon>go
> cygmon_handle_exception()monitor_loop return=0
> Returned from breakpoint
> Waiting for host based download
>
> Press space bar to abort host download mode....
> ..
> ..
> ..
> Press space bar to abort host download mode....
>
> ********************
>
>
>
> Then I open another terminal and entered the directory of
> /opt/ixasdk/enp-2505/bin. I run the script .create_environment.rc and
> boot_bv.
> The screen of boot_bv show:
>
> *********************
>
> eht1: unknow interface: No such device
> rmmod: module pciDgNet is not loaded
> rmmod: module pciDg is not loaded
> Booting board
> before = 0x7e6c6700
>
> *********************
>
>
>
>
> Then the screen of minicom show below information:
>
> ********************
>
> Booting linux....
> Hit breakpointDisassembling
> 0xc4e9.8944 mrcge 13, 4, r9, cr3, cr14, {4}
> Waiting for host based download
>
> Press space bar to abort host download mode...
> Press space bar to abort host download mode...
> ..