[ixp1200] Question on enp-2505

[Yong Liu]

Make sure the modules in boot_bv can be loaded in your system.

I encountered some problems on dell gx260, the modules do not work on it.

If the modules can be loaded, you can check the config files, e.g. if you
have multiple
ethernet interface, you should change the eth value

----- Original Message ----- 
From: "Feng Tang" <ftan413 at cse.unsw.edu.au>
To: "Brandewie, Dirk J" <dirk.j.brandewie at intel.com>
Cc: <joel.d.schuetze at intel.com>; <ftan413 at cse.unsw.edu.au>;
<ixp1200 at CS.Princeton.EDU>
Sent: Monday, May 26, 2003 12:11 AM
Subject: [ixp1200] Question on enp-2505


> Hello,
>
> Currently, my problem when trying to boot linux is:
>
> After the board entered cygmon, I typed "go" command, then the minicom
> screen show below information:
>
> ******************
>
> cygmon>go
> cygmon_handle_exception()monitor_loop return=0
> Returned from breakpoint
> Waiting for host based download
>
> Press space bar to abort host download mode....
> ..
> ..
> ..
> Press space bar to abort host download mode....
>
> ********************
>
>
>
> Then I open another terminal and entered the directory of
> /opt/ixasdk/enp-2505/bin. I run the script .create_environment.rc and
> boot_bv.
> The screen of boot_bv show:
>
> *********************
>
> eht1: unknow interface: No such device
> rmmod: module pciDgNet is not loaded
> rmmod: module pciDg is not loaded
> Booting board
> before = 0x7e6c6700
>
> *********************
>
>
>
>
> Then the screen of minicom show below information:
>
> ********************
>
> Booting linux....
> Hit breakpointDisassembling
> 0xc4e9.8944 mrcge 13, 4, r9, cr3, cr14, {4}
> Waiting for host based download
>
> Press space bar to abort host download mode...
> Press space bar to abort host download mode...
> ..