Kamesh, Sorry, couldnt get back earlier. In general, it is very difficult to figure out remotely what the problem with your set up could be. For example, it could be a simple misconfiguration in your startup files or something as crazy as a bad ethernet port on the card or the PC (although it is unlikely). Can you describe in more detail your complete hardware and software setup? What is the output on your console when you fire up your ixstart script? Do all ACES start up properly? Is anything printed on the IXP console when you ping or connect the port to the PC? Try turning on debugging in ingress/egress ACEs to see if they report any activity on the connected port. (Makefile has debug defines) What do you mean below by "PC hangs when I connect" ? Basically, explain in detail, maybe somebody on this list can help. -- abhijeet On Thu, 3 Apr 2003, Kameswara Avasarala wrote:
Hi, Ping was not running. In fact the PC kind of hangs ie mouse pointer disappears etc when I connnect. I am able to see the output only after I disconnect.
Configuration: Ethernet port 1 of ENP-2505 is connected back-to-back to the eth1 of the host PC ( PC in which the card is plugged in) through a crossover cable. The IP address of the IXP port is 192.168.1.150 and the IP address of the PC port is 192.168.1.3 .
Also is there any option is the ixsys.config file through which I can specify the rate ? Thanks, Kamesh.