- ixp1200 - lists.cs.princeton.edu

[ixp2400] What kind of difference ixp2800 and ixp2400?
by 이문복 05 Feb '04

05 Feb '04

Hello~~^^ I was developed to sdk 3.1 in ixp2400. Um... I buy ixp2400/ixp2800 Programming on Amazon. MSF device is SPI4 in ixp2800 but ixp2400 is POS-PHY Level 3. What kind of difference ixp2800 and ixp2400? I hold only one of scratch ring for single PHY. Therefore, scatch ring size hold 1024. Right ? ... ... MSF_interrupt_status = 0x0000 0e00 May be, no rbuf element was free to accept mpacket. Please, solve me~~! Thanks in advance.

1 0

IXA University Program IXP425 Student Design Competition Announcement
by Schuetze, Joel D 03 Feb '04

03 Feb '04

Greetings, We are pleased to announce the Intel* IXA University Program IXP425 Student Design Competition. The Intel IXA University Program Student Design competition will allow undergraduate and graduate university students from U.S. Universities to present innovative work based on the Intel(r) IXA architecture, specifically the IXP425 network processor. We have a web-based application process available through the IXAEDU.com website and all entries will be reviewed by an Intel panel of experts. The best qualified selected entries will be awarded grants and IXP425 development kits for the proposed projects. After the selected projects have been completed and submitted for judging, the top two (2) projects will be selected to receive an award presented at the Fall 2004 Intel Developer Forum (IDF). Please note that this competition is available for students enrolled at US Universities only. For complete information please visit http://ixaedu.com/news/DesignCompetition. IXA University Program Intel Corporation

1 0

Behavior of the RFIFO.
by Mohamed Kone 27 Jan '04

27 Jan '04

Good day to everyone, I am new to development on IXP1200 and I have a few questions about the RFIFO's behavior. How do we know/test that the RFIFO is full? When the RFIFO is full, what is the default behavior? Does the previous content get overwritten by incoming packets or nothing gets inside until the RFIFO has space? Is the default behavior customable? Thank you for your time. Mohamed Kone College of Computing @ Georgia Tech Email: lechefs(a)cc.gatech.edu

1 0

RE: [ixp1200] Help needed regarding programming the Strong Arm
by David Mentre 22 Jan '04

22 Jan '04

Hello, > From: David Mentre [mailto:Mentre@tcl.ite.mee.com] > But, do you really need a simulator? As far as I know, the > main advantage of > having a general purpose processor like the ARM core on the > IXP processor is > to be able to program with usual development tools (C, etc.). > Why don't you > program on x86 and then cross-compile towards your IXP1200 ARM target? BTW, it reminds me that the Developer Workbench is able to execute Foreign Models, and Intel provides versions of its API running with the simulator. It should be possible to execute the C code running on the core as a model interfaced with the simulator. I've not tested it however. Yours, d. -- David Mentré <mentre(a)tcl.ite.mee.com> - Research engineer (Ph.D.) Mitsubishi Electric ITE-TCL / European Telecommunication Research Lab Phone: +33 2 23 45 58 29 / Fax: +33 2 23 45 58 59 http://www.mitsubishi-electric-itce.fr

1 0

RE: [ixp1200] Help needed regarding programming the Strong Arm
by David Mentre 22 Jan '04

22 Jan '04

Hello sharmila, > From: sharmila radhakrishnan [mailto:shar_mila2002in@yahoo.co.in] > Are there any > simulators available for programming the Strong Arm and > running them without hardware support ? You'll find on the web several ARM simulators. I don't know however there accuracy regarding StrongARM instruction set. SimIT-ARM http://www.ee.princeton.edu/~wqin/armsim.htm ARM simulator in GDB: http://www.gnu.org/software/gdb/gdb.html But, do you really need a simulator? As far as I know, the main advantage of having a general purpose processor like the ARM core on the IXP processor is to be able to program with usual development tools (C, etc.). Why don't you program on x86 and then cross-compile towards your IXP1200 ARM target? I hope it helps, Yours, d. -- David Mentré <mentre(a)tcl.ite.mee.com> - Research engineer (Ph.D.) Mitsubishi Electric ITE-TCL / European Telecommunication Research Lab Phone: +33 2 23 45 58 29 / Fax: +33 2 23 45 58 59 http://www.mitsubishi-electric-itce.fr

1 0

Help needed regarding programming the Strong Arm
by sharmila radhakrishnan 22 Jan '04

22 Jan '04

Hello All, I would like to know how to program the strongArm processor.At present I have developer workbench.Are there any simulators available for programming the Strong Arm and running them without hardware support ? Do let me know.Thanx in Advance. With regards, Sandya Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more.Download now.

1 0

RE: [ixp1200] Debugging on Hardware
by David Mentre 20 Jan '04

20 Jan '04

Hello Frank, > From: Frank Meerkoetter [mailto:meerkoetter@stud.fbi.fh-darmstadt.de] > Sent: Tuesday, January 20, 2004 8:57 AM > # ./WBSrvr > Rs_udbg_server RPC Task started > Rs_udbg_server TCP created > Rs_udbg_server entering svc_run > enter rs_udbg_attachlib_1 - ClieDram Tmp Physical - Virtual - p_to_v = > 0xdf4be00 > ntName=121.110.43.16:1331, MeMasMeDrv: unknown ioctl code 0xc04c7814 > k=f000f > Target BIG ENDIAN > MeDrv: MEDRV_SYSMEMSIZE ioctl failed, err = 5f > leave rs_udbg_attachlib_1 - obj=9100 Apparently, the WBSrvr failed when it wants to access microengines through MeDrv.o using IOCTLs on it. Have you loaded this kernel module? On the IXP2400, one should do "insmod MeDrv.o" before starting WBSrvr. I hope it helps, yours, d. -- David Mentré <mentre(a)tcl.ite.mee.com> - Research engineer (Ph.D.) Mitsubishi Electric ITE-TCL / European Telecommunication Research Lab Phone: +33 2 23 45 58 29 / Fax: +33 2 23 45 58 59 http://www.mitsubishi-electric-itce.fr

1 0

Debugging on Hardware
by Frank Meerkoetter 20 Jan '04

20 Jan '04

Hello, i would like to use the "Debug on HW" feature of the Workbench. I'm running the the Workbench Backend on the Target. If i try to download some code i get the following error at the target. # ./WBSrvr Rs_udbg_server RPC Task started Rs_udbg_server TCP created Rs_udbg_server entering svc_run enter rs_udbg_attachlib_1 - ClieDram Tmp Physical - Virtual - p_to_v = 0xdf4be00 ntName=121.110.43.16:1331, MeMasMeDrv: unknown ioctl code 0xc04c7814 k=f000f Target BIG ENDIAN MeDrv: MEDRV_SYSMEMSIZE ioctl failed, err = 5f leave rs_udbg_attachlib_1 - obj=9100 The message at the Workbenchside is the following: "Attach to debug library operation failed" I'm using an IXDP2800, the MontaVista Preview Kit 3.0 with an kernel2.4.21-rmk1-ds3 and the IXA-SDK3.1. Does anybody know this problem? TIA Frank

1 0

RE: [ixp1200] IXP2400 Intel libraries: kernel/user space
by David Mentre 15 Jan '04

15 Jan '04

Hello Romit, [ Disclaimer: I'm also new to IXP2400, so do not take my anwser for a definitive one. ] > From: romit dasgupta [mailto:romit@myrealbox.com] > Sent: Thursday, January 15, 2004 5:59 AM > I am working on IXP2400 and want to use the intel provided > libraries for > microcode loading/initialization and running. And in many occasions I > want to access the Resource Manager APIs as well. I read the > documents > as provided by Intel , mainly the following > > Intel IXP2400/IXP2800 Network Processors XScale Support libraries > Reference manual. > > I have not seen any explicit information in the above document which > hints on running the resource manager & core compoent libraries in > kernel space. > Most of the examples that come with the ixa_sdk_3.1 however > loads kernel > modules which implements these libraries. I think you are making an error. Intel libraries are implemented in _user_ space. The kernel module (MeDrv.o) is only used to make microengines CSR _visible_ to user space. > My question is, can i use the Resource Manager API's & Core Component > Library in user space, without loading them as modules > (perhaps building > these as libraries). I can acccess them in kernel space for > sure but I > have a feeling that it can be done through user space as well. Any > insight on this will be highly valuable. You need the module to access CSR spaces of microengines. Otherwise, all the library are in user space. I hope it helps, Yours, david -- David Mentré <mentre(a)tcl.ite.mee.com> - Research engineer (Ph.D.) Mitsubishi Electric ITE-TCL / European Telecommunication Research Lab Phone: +33 2 23 45 58 29 / Fax: +33 2 23 45 58 59 http://www.mitsubishi-electric-itce.fr

1 0

IXP2400 Intel libraries: kernel/user space
by romit dasgupta 14 Jan '04

14 Jan '04

Hello, I am working on IXP2400 and want to use the intel provided libraries for microcode loading/initialization and running. And in many occasions I want to access the Resource Manager APIs as well. I read the documents as provided by Intel , mainly the following Intel IXP2400/IXP2800 Network Processors XScale Support libraries Reference manual. I have not seen any explicit information in the above document which hints on running the resource manager & core compoent libraries in kernel space. Most of the examples that come with the ixa_sdk_3.1 however loads kernel modules which implements these libraries. My question is, can i use the Resource Manager API's & Core Component Library in user space, without loading them as modules (perhaps building these as libraries). I can acccess them in kernel space for sure but I have a feeling that it can be done through user space as well. Any insight on this will be highly valuable. Regards, -Romit

1 0

Accessing SRAM in IXP2400
by Romit Dasgupta 14 Jan '04

14 Jan '04

Hi, I am using MVista IXDP2400 preview kit on a Radisys board (IXP2400). The board has DRAM at 0x0x00000000-0x10000000 (256M). SRAM Channel 0 (4M) : 0x80000000-0x80400000 SRAM Channel 1 (4M) : 0x90000000-0x90400000 When I boot linux, it can be seen that the kernel is loaded into 0xc0000000 and its alloted a total of 64M in DRAM space. I could not see SRAM at all. To enable SRAM I passed mem=64M mem=4M@0x80000000 in the command line. After compiling the image and loading it I could see that the kernel has 68M but before the root file system could be enabled many of the ioremaps (used by network driver like eepro100) are failing. This failures result in the inability to activate some PCI devices (network card) and thus cannot load the root file system over NFS. Here are the console logs. I have marked some relevant messages by ^^^^^^ Memstart: c000000 Memsize: 4000000 ^^^^^^^^^^^^^^^^^^ Node: 0 Memstart: 80000000 Memsize: 400000 ^^^^^^^^^^^^^^^^^^ Node: 0 On node 0 totalpages: 17408 zone(0): 476160 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,57600 ip=bootp root=nfs nohalt mem=64M mem=40 rtsched version <20030619.1708.46> Calibrating delay loop... 599.65 BogoMIPS Memory: 64MB 4MB = 68MB total ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Memory: 62812KB available (1168K code, 237K data, 196K init) XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc. XScale cache_lock_init called Calling consistent alloc low_level_page initialized low_level_page @ 0xf4800000 icache_lock_fn @ 0xf4800080 dcache_lock_fn @ 0xf48000a0 icache_unlock_fn @ 0xf4800098 dcache_unlock_fn @ 0xf48000f0 Initializing TLB locking TLB locking initialized Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX Scanning bus 00 Found 00:00 [8086/9001] 000b40 00 Found 00:08 [8086/b555] 000680 00 Found 00:20 [104c/ac28] 000604 01 Fixups for bus 00 PCI: bus0: Fast back to back transfers enabled Scanning behind PCI bridge 00:04.0, config 010100, pass 0 Scanning bus 01 Found 01:00 [8086/1229] 000200 00 Fixups for bus 01 PCI: bus1: Fast back to back transfers enabled Bus scan for 01 returning with max=01 Scanning behind PCI bridge 00:04.0, config 010100, pass 1 Bus scan for 00 returning with max=01 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.10 (20020120) Richard Gooch (rgooch(a)atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communication. Failed to allocate 401728 bytes for deflate workspace JFFS2 error: Failed to initialise zlib workspaces i2c-core.o: i2c core module version 2.6.2 (20011118) i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118) i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed ttyS00 at 0xfaffb003 (irq = 2) is a XScale UART pci_window_address = 0x00000000 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ixpctl: unable to __ioremap PCI memory region ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100l eepro100.c: $Revision: 1.2 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sas eepro100: cannot remap MMIO region 1000 @ e0200000 Failed to ioremap ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) IP-Config: No network devices available. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Couldn't find valid RAM disk image starting at 0. Freeing initrd memory: 4096K Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. request_module[block-major-2]: Root fs not mounted VFS: Cannot open root device "nfs" or 02:00 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 02:00 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ My question is how do I enable SRAM? I understand the memory locations SRAM & DRAM are discontiguos. I tried doing ioremap and could access SRAM but I feel that ioremap is only a temporary way to access SRAM. The funny thing is that when I also try to enable SRAM channel 1 by mem=64M mem=4M@0x80000000 mem=4M@0x90000000 the system halts after saying Booting the kernel.. __ioremap(0x80000000, 4*1024*1024,0) and later __iounmap works. Not sure if this is the right way to do it. And I havent digged into why ioremaps by PCI devices in the eariler case fails. Any insight will be very useful. Thanks in advance, -Romit

1 0

Running sample application on ENP2611 board
by Ning Weng 09 Jan '04

09 Jan '04

Folks, Recently we got ENP2611 board based on IXP2400. After successfully installed and boot, we are confused to run a simple sample application on the hardware. It is really different with our previous one- ENP2505 based on IXP200. Can you share your experience of playing ENP2611 or kindly point me the right documentation for it? Thanks in advance, Ning

3 2

ix_rm_init() fails
by Frank Meerkoetter 09 Jan '04

09 Jan '04

Hello, i've this very simple module to test the Resource-Manager. It just calls ix_rm_init() on module_init() and ix_rm_term() on module_cleanup(). #include <linux/module.h> #include <linux/version.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/types.h> #include <linux/slab.h> #include <linux/proc_fs.h> #include <linux/vmalloc.h> #include <ix_ossl.h> #include <ix_rm.h> #define DBG_ERR KERN_ERR #define DBG_WARN KERN_WARNING #define DBG_INFO KERN_INFO #define DEFAULT_LVL DBG_WARN #define DBG_LOG(lvl,str,args...) printk(lvl""str, ##args) #define DBG_MSG(str,args...) DBG_LOG(DEFAULT_LVL, str,##args) int init_module(void) { ix_error err; DBG_MSG("Initializing RM ...\n"); err = ix_rm_init(0); if(err != IX_SUCCESS) { DBG_MSG("RM Initialization FAILED.\n"); return err; } return 0; } void cleanup_module(void) { ix_error err; err = ix_rm_term(); if (err != IX_SUCCESS) { DBG_MSG("RM Termination FAILED.\n"); } } If i load this module it bails out with the following message: Initializing RM ... enable_irq(16) unbalanced from c9cd6e90 enable_irq(18) unbalanced from c9cd6f38 enable_irq(17) unbalanced from c9cd7010 enable_irq(19) unbalanced from c9cd70e0 enable_irq(24) unbalanced from c9cd7358 enable_irq(26) unbalanced from c9cd7400 enable_irq(25) unbalanced from c9cd74d4 enable_irq(27) unbalanced from c9cd75a4 Error in file: source/internal/internal_pci_communication.c, line: 1213 Function: _ix_rm_pci_communication_init Reason: connecting the PCI doorbell interrupt failed! Error Chain: 0x00000000 Error : 0x0200003e Error in file: source/remote_communication.c, line: 116 Function: ix_rm_remote_comm_service_register Reason: Remote service initializer failed! Error in file: source/remote_communication.c, line: 253 Function: ix_rm_init_pci_remote_communication Reason: Initialization of PCI remote service failed! Error in file: source/internal/internal_communication.c, line: 1466 Function: _ix_rm_communication_init Reason: initialization of PCI communication failed! Error Chain: 0x0200003e Error : 0x02000033 Error in file: source/system.c, line: 774 Function: ix_rm_init Reason: Resource Manager library initialization failed! RM Initialization FAILED. Im using the MontaVista-Preview-Kit 3.0 with a kernel-2.4.21-rmk1-ds3. All the XScale-Support-Libs are loaded. # lsmod Module Size Used by rm_lib 273828 0 (unused) halMev2_lib 340600 0 [rm_lib] libossl 5096 0 [rm_lib halMev2_lib] halMeDrv 19784 0 [rm_lib halMev2_lib] Has anyone an idea what is wrong? TIA Frank

1 1

RE: [ixp1200] Running sample application on ENP2611 board
by David Mentre 09 Jan '04

09 Jan '04

Hello Ning, > From: Ning Weng [mailto:nweng@ecs.umass.edu] > Recently we got ENP2611 board based on IXP2400. After successfully > installed and boot, we are confused to run a simple sample > application > on the hardware. It is really different with our previous > one- ENP2505 > based on IXP200. Can you share your experience of playing ENP2611 or > kindly point me the right documentation for it? [ Disclaimer: I don't use an ENP2611 board ] What do you mean by "running a sample application"? If you have the Intel SDK, you should have access to Intel Software Framework with reference designs that contains a lot of sample code (at least, we have those reference designs for IXMB 2400 reference board). Regarding programming issues, you should read the IXP2400/2800 Programming book, from Intel press. A quite good introduction. I hope it helps a little, yours, david -- David Mentré <mentre(a)tcl.ite.mee.com> - Research engineer (Ph.D.) Mitsubishi Electric ITE-TCL / European Telecommunication Research Lab Phone: +33 2 23 45 58 29 / Fax: +33 2 23 45 58 59 http://www.mitsubishi-electric-itce.fr

1 0

I am newbie
by Liang Jian 23 Dec '03

23 Dec '03

hi,all I saw Intel ixp1200 and ixp2400 docs for days and I have a radisys ENP2611 board. so I will do on the borad. are you give me some suggestion? and where have a open lab or projects,except vera and netbind, I want to study about ixp2400 or ixp2800 microcode and where have electronic books thanks. Regards. --------------------------------- Do you Yahoo!? Free Pop-Up Blocker - Get it now

1 0

Re:./bootscript
by Darshan Uka 19 Dec '03

19 Dec '03

Hello, While running the script ./bootscript the following errors are seen in the minicom terminal. For this part of the script expect{ "[root@Linux modules]$" } !./.install_PCI_driver i got the following error: [root@Linux modules]$./ .install_PCI_driver: insmod:command not found. For this part of the script expect{ "[root@Linux modules]$" } !./.send_mount I got the following error: [root@Linux modules]$mount -t nfs 140.192.37.41:/opt /nfs mount: RPC : Port mapper failure -RPC: Unable to send For this part of the script expect{ "[root@Linux modules]$" } !./.send_set_ifconfig I got the following error: [root@Linux modules]$ifconfig eth0 140.192.37.230 PCINetDev: pciDg_net_open has not received conn Id SIOCSIFFLAGS: Operation not permitted. Any suggestions on how i could fix these errors. Thanks, -Darshan. _________________________________________________________________ Enjoy the holiday season with great tips from MSN. http://special.msn.com/network/happyholidays.armx

2 1

Re:pinging ENP2505-linux host
by Darshan Uka 19 Dec '03

19 Dec '03

Hi, After booting the linux through the minicom window i am still not able to ping the target[ENP 2505 board] from the linux host terminal and vice-versa.Any suggestions? Also the nfs mount doesn't work quite well while booting.Any suggestions? Thanks, -Darshan _________________________________________________________________ Grab our best dial-up Internet access offer: 6 months @$9.95/month. http://join.msn.com/?page=dept/dialup

1 0

(no subject)
by Darshan Uka 17 Dec '03

17 Dec '03

Hello, Does anyone have the enp_changes_ixa_sdk.patch ? Thanks, -Darshan _________________________________________________________________ Make your home warm and cozy this winter with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

1 0

(no subject)
by Darshan Uka 16 Dec '03

16 Dec '03

Hi, While trying to configure the dhcp based on the following instructions from linux setup guide for ENP from Radisys: Q.1.How do i find the mac address of the ENP board? I did a /sbin/ifconfig but it shows the ip and mac of only the NIC card installed on it. Thanks, 4.4.Configure DHCP The DHCP protocol should be configured to supply an IP address to the ENP system using the BOOTP protocol. 1. Edit or create the configuration file /etc/dhcpd.conf adding Set a.b.c.d to your subnet address Set e.f.g.h to your subnet mask Set i.j.k.l to your gateway address Set m.n.o.p to your target IP address Set xx:xx:xx:xx:xx:xx to your ENP MAC address. allow bootp; subnet a.b.c.d netmask e.f.g.h { default-lease-time 1209600; max-lease-time 31557600; option routers i.j.k.l; group { host enp_linux.radisys.com { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address m.n.o.p; } } } -Darshan _________________________________________________________________ Grab our best dial-up Internet access offer: 6 months @$9.95/month. http://join.msn.com/?page=dept/dialup

1 0

Problem of installing vmware at Redhat Linux 7.3
by Ning Weng 15 Dec '03

15 Dec '03

Hello, In attempting to install VMware on Redhat Linux 7.3 I got the message "What is the location of the C header files that match your running kernel [/usr/src/linus/include]? It doesn't like /usr/src/redhat or /usr/lib or /usr/include. One of the messages is that it is looking for "linux" "asm" "net" and can't find them, although I can see them. Another message is that the directory has the wrong version kernel and is needs the correct one. What is the best thing for me to do? Thanks, -Ning

2 1

RE: [ixp1200] Re:boot driver file
by Darshan Uka 12 Dec '03

12 Dec '03

Hello Tim, Thanks. I will do so. -Darshan. ----Original Message Follows---- From: tstevens <tim.stevens(a)intec.ugent.be> Reply-To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Date: Fri, 12 Dec 2003 14:06:52 +0100 MIME-Version: 1.0 X-Sender: tstevens(a)pop.intec2.ugent.be Received: from bluebox.CS.Princeton.EDU ([128.112.136.38]) by mc1-f5.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Fri, 12 Dec 2003 05:03:16 -0800 Received: from mm.CS.Princeton.EDU (mm.CS.Princeton.EDU [128.112.136.88])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBCD3Dcp016530(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);Fri, 12 Dec 2003 08:03:13 -0500 (EST) Received: from mm.CS.Princeton.EDU (localhost [127.0.0.1])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBCD3A5l005078;Fri, 12 Dec 2003 08:03:12 -0500 (EST) Received: from ribavirin.CS.Princeton.EDU (navgw [128.112.136.44])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with SMTP id hBCD395k005073for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 08:03:09 -0500 (EST) Received: from bluebox.CS.Princeton.EDU ([128.112.136.38])by ribavirin.CS.Princeton.EDU (NAVGW 2.5.2.17) with SMTP idM2003121208030821456for <ixp1200(a)lists.cs.princeton.edu>; Fri, 12 Dec 2003 08:03:08 -0500 Received: from plinius.intec.ugent.be (plinius.intec.ugent.be [157.193.122.4])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP idhBCD16co016337 for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 08:03:08 -0500 (EST) Received: from localhost (localhost [127.0.0.1])by plinius.intec.ugent.be (Postfix) with ESMTP id 4046BBD52for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 14:01:05 +0100 (CET) Received: from lampo.intec.ugent.be (lampo.intec.ugent.be [157.193.122.186])by plinius.intec.ugent.be (Postfix) with ESMTP id 4774BBD51for <ixp1200(a)lists.cs.princeton.edu>;Fri, 12 Dec 2003 14:01:03 +0100 (CET) X-Message-Info: yilqo4+6kc4bNFF0EkwhX+wjF3GlP/JR X-Mailman-Handler: $Id: mm-handler,v 1.2 2002/04/05 19:41:09 bwarsaw Exp $ Message-Id: <5.2.1.1.0.20031212134346.03e92ba0(a)pop.intec2.ugent.be> X-Mailer: QUALCOMM Windows Eudora Version 5.2.1 X-Virus-Scanned: by AMaViS snapshot-20020222 X-BeenThere: ixp1200(a)lists.cs.princeton.edu X-Mailman-Version: 2.1.3 Precedence: list List-Id: IXP1200 Developer's List <ixp1200.lists.cs.princeton.edu> List-Unsubscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=unsubscribe> List-Archive: <https://lists.cs.princeton.edu/mailman/private/ixp1200> List-Post: <mailto:ixp1200@lists.cs.princeton.edu> List-Help: <mailto:ixp1200-request@lists.cs.princeton.edu?subject=help> List-Subscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=subscribe> Errors-To: ixp1200-bounces(a)lists.cs.princeton.edu Return-Path: ixp1200-bounces(a)lists.cs.princeton.edu X-OriginalArrivalTime: 12 Dec 2003 13:03:17.0039 (UTC) FILETIME=[4F1A0BF0:01C3C0B0] Hi, We encountered the same problem with the boot_drv rpm and the remainder of the mail explains how we solved it. IMPORTANT NOTE: 1) Please notice the "3" in our boot_drv RPM filename. This means we are not using the boot_drv RPM supplied by Intel anymore, because we noticed packet loss using the Intel package on a Radisys ENP-2505 board (see previous postings). Probably, this does *not* apply to non-RadiSys boards meaning you can use the Intel supplied package in those situations. However, the installation fault encountered (and the solution) was the same for both versions of the package... Here is a step-by-step guide to solve the problem: - rpm -recompile boot_drv-2.0.1-3.src.rpm There's a fault in the installation script. The installation will fail at a certain point. The remainder of the driver installation will have to be done manually: - cd /usr/src/RPM/BUILD/driver/bootixp/ - Modify create_environment.rc: Change "HOST_I = eth1" to "HOST_I = ethx" with x the number of non-IXP1200 NIC's in the computer. - Modify .create_environment: Change "exportfs -ra" to "exportfs -ra >& /dev/null" - cd /usr/src/RPM/BUILD/driver/src/boot_drv/ - Modify load_bv: Change major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` to major=`cat /proc/devices | grep $module | cut -d ' ' -f 1` - Modify Makefile: Change cp bvloadapp ../bin to cp bvloadapp $(BOOTDIR) Change cp $(TARGET).o ../bin to cp $(TARGET).o $(BOOTDIR) Add to "install: all" section: (use TAB, not 8 spaces !!!) cp load_bv $(BOOTDIR) cp unload_bv $(BOOTDIR) - make clean - make dep - make - make install - cd /usr/src/RPM/BUILD/driver/src/pciDg - Modify rules.mk: Change ARM-KERNEL-INCLUDES = $(PWD)/../linux/include to ARM-KERNEL-INCLUDES = $(PWD)/../linuxIXAedu/include Change X86-KERNEL-INCLUDES = to X86-KERNEL-INCLUDES = /usr/src/linux/include Change CFLAGS = -g -O2 -Wall -I ../module to CFLAGS = -g -O2 -Wall -I ../module -I $(X86-KERNEL-INCLUDES) - make clean - make - make install - cd /usr/src/RPM/BUILD/driver/ - mkdir /opt/ixasdk/enp-2505 - cp -fR * /opt/ixasdk/enp-2505 - Eventually reboot the machine (probably not necessary) Hope this helps. Best regards, Tim _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _________________________________________________________________ Take advantage of our best MSN Dial-up offer of the year six months @$9.95/month. Sign up now! http://join.msn.com/?page=dept/dialup

1 0

Re:boot driver file
by tstevens 12 Dec '03

12 Dec '03

Hi, We encountered the same problem with the boot_drv rpm and the remainder of the mail explains how we solved it. IMPORTANT NOTE: 1) Please notice the "3" in our boot_drv RPM filename. This means we are not using the boot_drv RPM supplied by Intel anymore, because we noticed packet loss using the Intel package on a Radisys ENP-2505 board (see previous postings). Probably, this does *not* apply to non-RadiSys boards meaning you can use the Intel supplied package in those situations. However, the installation fault encountered (and the solution) was the same for both versions of the package... Here is a step-by-step guide to solve the problem: - rpm -recompile boot_drv-2.0.1-3.src.rpm There's a fault in the installation script. The installation will fail at a certain point. The remainder of the driver installation will have to be done manually: - cd /usr/src/RPM/BUILD/driver/bootixp/ - Modify create_environment.rc: Change "HOST_I = eth1" to "HOST_I = ethx" with x the number of non-IXP1200 NIC's in the computer. - Modify .create_environment: Change "exportfs -ra" to "exportfs -ra >& /dev/null" - cd /usr/src/RPM/BUILD/driver/src/boot_drv/ - Modify load_bv: Change major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` to major=`cat /proc/devices | grep $module | cut -d ' ' -f 1` - Modify Makefile: Change cp bvloadapp ../bin to cp bvloadapp $(BOOTDIR) Change cp $(TARGET).o ../bin to cp $(TARGET).o $(BOOTDIR) Add to "install: all" section: (use TAB, not 8 spaces !!!) cp load_bv $(BOOTDIR) cp unload_bv $(BOOTDIR) - make clean - make dep - make - make install - cd /usr/src/RPM/BUILD/driver/src/pciDg - Modify rules.mk: Change ARM-KERNEL-INCLUDES = $(PWD)/../linux/include to ARM-KERNEL-INCLUDES = $(PWD)/../linuxIXAedu/include Change X86-KERNEL-INCLUDES = to X86-KERNEL-INCLUDES = /usr/src/linux/include Change CFLAGS = -g -O2 -Wall -I ../module to CFLAGS = -g -O2 -Wall -I ../module -I $(X86-KERNEL-INCLUDES) - make clean - make - make install - cd /usr/src/RPM/BUILD/driver/ - mkdir /opt/ixasdk/enp-2505 - cp -fR * /opt/ixasdk/enp-2505 - Eventually reboot the machine (probably not necessary) Hope this helps. Best regards, Tim

1 0

RE: [ixp1200] Re:boot driver file
by Darshan Uka 11 Dec '03

11 Dec '03

Hello Joel, Thanks, but since the file is 47.3MB i don't think my mail box can handle it. It would be very helpful if you could upload it on some website and i could download it using ftp or http. Thank you so much. -Darshan ----Original Message Follows---- From: "Schuetze, Joel D" <joel.d.schuetze(a)intel.com> Reply-To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> To: "IXP1200 Developer's List" <ixp1200(a)lists.cs.princeton.edu> Subject: RE: [ixp1200] Re:boot driver file Date: Thu, 11 Dec 2003 14:31:17 -0800 MIME-Version: 1.0 Received: from bluebox.CS.Princeton.EDU ([128.112.136.38]) by mc10-f2.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Thu, 11 Dec 2003 14:31:33 -0800 Received: from mm.CS.Princeton.EDU (mm.CS.Princeton.EDU [128.112.136.88])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBBMVQcp026981(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);Thu, 11 Dec 2003 17:31:26 -0500 (EST) Received: from mm.CS.Princeton.EDU (localhost [127.0.0.1])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP id hBBMVORB017531;Thu, 11 Dec 2003 17:31:26 -0500 (EST) Received: from ribavirin.CS.Princeton.EDU (navgw [128.112.136.44])by mm.CS.Princeton.EDU (8.12.10/8.12.10) with SMTP id hBBMVNRA017526for <ixp1200(a)lists.cs.princeton.edu>;Thu, 11 Dec 2003 17:31:23 -0500 (EST) Received: from bluebox.CS.Princeton.EDU ([128.112.136.38])by ribavirin.CS.Princeton.EDU (NAVGW 2.5.2.17) with SMTP idM2003121117312301480for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 17:31:23 -0500 Received: from hermes.jf.intel.com (fmr05.intel.com [134.134.136.6])by bluebox.CS.Princeton.EDU (8.12.10/8.12.10) with ESMTP idhBBMVLco026966 for <ixp1200(a)lists.cs.princeton.edu>;Thu, 11 Dec 2003 17:31:22 -0500 (EST) Received: from talaria.jf.intel.com (talaria.jf.intel.com [10.7.209.7])by hermes.jf.intel.com (8.12.9-20030918-01/8.12.9/d: major-outer.mc,v 1.11 2003/12/03 18:29:28 root Exp $) with ESMTP id hBBMWak5010524for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 22:32:36 GMT Received: from orsmsxvs040.jf.intel.com (orsmsxvs040.jf.intel.com[192.168.65.206])by talaria.jf.intel.com (8.12.9-20030918-01/8.12.9/d: major-inner.mc,v 1.6 2003/12/04 00:48:44 root Exp $) with SMTP id hBBMUjnL012241for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 22:30:48 GMT Received: from orsmsx331.amr.corp.intel.com ([192.168.65.56])by orsmsxvs040.jf.intel.com (SAVSMTP 3.1.1.32) with SMTP idM2003121114311721621for <ixp1200(a)lists.cs.princeton.edu>; Thu, 11 Dec 2003 14:31:17 -0800 Received: from orsmsx410.amr.corp.intel.com ([192.168.65.64]) byorsmsx331.amr.corp.intel.com with Microsoft SMTPSVC(5.0.2195.5329); Thu, 11 Dec 2003 14:31:17 -0800 X-Message-Info: yilqo4+6kc6Detr5UNYgvBJdl6mKbCqc X-Mailman-Handler: $Id: mm-handler,v 1.2 2002/04/05 19:41:09 bwarsaw Exp $ content-class: urn:content-classes:message X-MimeOLE: Produced By Microsoft Exchange V6.0.6487.1 Message-ID: <EFC3A13CCA5957439255D7DB679F2C8713FCDB(a)orsmsx410.jf.intel.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [ixp1200] Re:boot driver file Thread-Index: AcPALb7ChCpbYLG6Rh2K1JWZ5/jr5QACEBRg X-OriginalArrivalTime: 11 Dec 2003 22:31:17.0737 (UTC)FILETIME=[7E5E1D90:01C3C036] X-Scanned-By: MIMEDefang 2.31 (www . roaringpenguin . com / mimedefang) X-BeenThere: ixp1200(a)lists.cs.princeton.edu X-Mailman-Version: 2.1.3 Precedence: list List-Id: IXP1200 Developer's List <ixp1200.lists.cs.princeton.edu> List-Unsubscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=unsubscribe> List-Archive: <https://lists.cs.princeton.edu/mailman/private/ixp1200> List-Post: <mailto:ixp1200@lists.cs.princeton.edu> List-Help: <mailto:ixp1200-request@lists.cs.princeton.edu?subject=help> List-Subscribe: <https://lists.cs.princeton.edu/mailman/listinfo/ixp1200>,<mailto:ixp1200-request@lists.cs.princeton.edu?subject=subscribe> Errors-To: ixp1200-bounces(a)lists.cs.princeton.edu Return-Path: ixp1200-bounces(a)lists.cs.princeton.edu Darshan, I will mail it to you. Cheers, Joel -----Original Message----- From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto:ixp1200-bounces@lists.cs.princeton.edu] On Behalf Of Darshan Uka Sent: Thursday, December 11, 2003 1:28 PM To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Hello, Does any one have the boot_drv-2.0-1.src.rpm file? Mine gives an error while doing the rpm -recompile boot_drv-2.0-1.src.rpm Thanks, -Darshan _________________________________________________________________ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 _________________________________________________________________ Cell phone switch rules are taking effect find out more here. http://special.msn.com/msnbc/consumeradvocate.armx

1 0

RE: [ixp1200] Re:boot driver file
by Schuetze, Joel D 11 Dec '03

11 Dec '03

Darshan, I will mail it to you. Cheers, Joel -----Original Message----- From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto:ixp1200-bounces@lists.cs.princeton.edu] On Behalf Of Darshan Uka Sent: Thursday, December 11, 2003 1:28 PM To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re:boot driver file Hello, Does any one have the boot_drv-2.0-1.src.rpm file? Mine gives an error while doing the rpm -recompile boot_drv-2.0-1.src.rpm Thanks, -Darshan _________________________________________________________________ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

1 0

Re:boot driver file
by Darshan Uka 11 Dec '03

11 Dec '03

Hello, Does any one have the boot_drv-2.0-1.src.rpm file? Mine gives an error while doing the rpm -recompile boot_drv-2.0-1.src.rpm Thanks, -Darshan _________________________________________________________________ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

1 0