- ixp1200 - lists.cs.princeton.edu

packet_rx when simulation
by Liang Jian 13 Jan '06

13 Jan '06

Hi,ALL I make new project with packet_rx.uc,when simulation project and command line hint: "ERROR: One or more import-variable(s) in the UOF is uninitialized. Status=0x820e" if remove packet_rx.list from microengine , it no ERROR! anyone Can help me ?? Thanks --------------------------------- Yahoo! Photos Showcase holiday pictures in hardcover Photo Books. You design it and well bind it!

1 2

Problem with connecting host to IXP1200 board
by Himanshu 22 Dec '05

22 Dec '05

Hi all, I have followed all the procedure given in the manual to connect the host machine to the IXP1200 evaluation board. I am summarising the steps taken by me: 1.Start ftp server 2.Starting hyperterminal and switch on the board 3.Let it boot with all the proper settings of ip and username/passwds for vxworks image 4.Start Tornado and configure server 5.Launch the server 6.Ld < c:\ixp1200\vxworks_lib\VxWorks_Gig.o 7.NetApp_GigInit 8.Start Developer's workbench and open a project 9.Set hardware options and hardware debugging All the above steps go pretty smoothly, but when i try to go in the debugging mode, it gives the following error: " error opening network connection to node 'target' " where, "target" is the target server name i have configured. I have checked for faulty cables, faulty adapters, proper jumper settings on the board, etc. But i couldnt get through inspite of all being fine. Previously, the board has been used to carry out hardware testing successfully. This is the first time such an error is encountered. Please show a way out if u have encountered such a problem and got thru. Thanks in advance. Himanshu IIT Bombay.

1 0

Regarding IXP 1200 installation
by mradha 12 Dec '05

12 Dec '05

Hi, I am installing the ixp 1200(ENP 2505) board with a windows NT 4.0 host system, i am working with IXA SDK 2.0 in simulation, but hardware is not accessed, If anyone know, please send me to,how to access the hardware, and further processing Thanks&Regards, Radha --- On Mon 12/12, ixp1200-bounces(a)lists.cs.princeton.edu < ixp1200-bounces(a)lists.cs.princeton.edu > wrote: From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto: ixp1200-bounces(a)lists.cs.princeton.edu] To: mradha(a)myway.com Date: Mon, 12 Dec 2005 00:43:21 -0500 Subject: The results of your email commands The results of your email command are provided below. Attached is your original message. - Unprocessed: I am installing the ixp 1200(ENP 2505) board with a windows NT 4.0 host system, i am working with IXA SDK 2.0 in simulation, but hardware is not accessed, If anyone know, please send me to,how to access the hardware, and further processing Thanks&Regards, Radha --- On Fri 12/09, ixp1200-request(a)lists.cs.princeton.edu < ixp1200-request(a)lists.cs.princeton.edu > wrote: From: ixp1200-request(a)lists.cs.princeton.edu [mailto: ixp1200-request(a)lists.cs.princeton.edu] To: mradha(a)myway.com Date: Fri, 09 Dec 2005 12:17:17 -0500 Subject: Welcome to the "ixp1200" mailing list (Digest mode) Welcome to the ixp1200(a)lists.cs.princeton.edu mailing list! While brief, informative announcements of products or services that benefit most subscribers are allowed, blatant commercial advertising and job postings are not allowed. Please do not clutter the archive with HTML messages or MIME attachments. Use plain ASCII text only. (Place code, papers, etc., on a WWW or FTP site and provide a URL reference instead.) This is an "open" discussion forum in the sense that proprietary information should not be posted to the list. Note that this is a "closed" discussion forum in the sense that we will continue to manually approve submission requests and that we retain the right to unsubscribe abusers of the list. To post to this list, send your email to: ixp1200(a)lists.cs.princeton.edu General information about the mailing list is at: https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: https://lists.cs.princeton.edu/mailman/options/ixp1200/mradha%40myway.com You can also make such adjustments via email by sending a message to: ixp1200-request(a)lists.cs.princeton.edu with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is: vinayaka Normally, Mailman will remind you of your lists.cs.princeton.edu mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. Th! ere is also a button on your options page that will email your current password to you. _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your hom! e on the Web - http://www.myway.com - Ignored: - Done. > --- Begin Attached Message--- Hi, I am installing the ixp 1200(ENP 2505) board with a windows NT 4.0 host system, i am working with IXA SDK 2.0 in simulation, but hardware is not accessed, If anyone know, please send me to,how to access the hardware, and further processing Thanks&Regards, Radha --- On Fri 12/09, ixp1200-request(a)lists.cs.princeton.edu < ixp1200-request(a)lists.cs.princeton.edu > wrote: From: ixp1200-request(a)lists.cs.princeton.edu [mailto: ixp1200-request(a)lists.cs.princeton.edu] To: mradha(a)myway.com Date: Fri, 09 Dec 2005 12:17:17 -0500 Subject: Welcome to the "ixp1200" mailing list (Digest mode) Welcome to the ixp1200(a)lists.cs.princeton.edu mailing list! While brief, informative announcements of products or services that benefit most subscribers are allowed, blatant commercial advertising and job postings are not allowed. Please do not clutter the archive with HTML messages or MIME attachments. Use plain ASCI! I text only. (Place code, papers, etc., on a WWW or FTP site and provide a URL reference instead.) This is an "open" discussion forum in the sense that proprietary information should not be posted to the list. Note that this is a "closed" discussion forum in the sense that we will continue to manually approve submission requests and that we retain the right to unsubscribe abusers of the list. To post to this list, send your email to: ixp1200(a)lists.cs.princeton.edu General information about the mailing list is at: https://lists.cs.princeton.edu/mailman/listinfo/ixp1200 If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: https://lists.cs.princeton.edu/mailman/options/ixp1200/mradha%40myway.com You can also make such adjustments via email by sending a message to: ixp1200-request(a)lists.cs.princeton.edu with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is: vinayaka Normally, Mailman will remind you of your lists.cs.princeton.edu mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you. _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com > --- End Attached Message--- _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com

2 1

regarding setup,strong ARM,Receiving a packet
by sri 02 Dec '05

02 Dec '05

Hai, I am having some doubts.I have installed the IXA SDK and working in the environment.Now i want to work in strong ARM processor.For that I have to install RedHat Linux 6.3.But i searched for that for downloading it.unfortunately i didn't get that.can i use a higher version than 6.3.Im having Redhat Linux 7.2. Im going to install both the OS in the single system and to install the VMware.There is one more option.Installing the two OS in different systems and to connect the two systems by a cable.Can anyone tell me which ever is easier?Some of my friends told that if you install VMware be careful.otherwise sometimes the system crashes.so kindly tell me which setup can be done? I get into the hyperterminal and im having a <cygmon> prompt.After that i dont know how to proceed.Can you answer me this problem also. I want to receive a packet and write the program which is in the text book (IXP programming by Robert Kunze)and didn't how to run it and where to set the breaking point like that.Im familiar with how to create a frame and assigning the ports and the devices. One more problem i didn't know which is the best.That is writing the program in microengineC or with microcode.Im familiar with 8085 assembly language.Kindly answer me for these questions. 1.Set up(Regarding OS) 2.RedHat Linux version 3.working the Strong ARM 4.Receiving the packet program 5.Regarding <CYGMON> 6.writing the program in Microengine C or Microcode Im expecting anyone reply.Thanks in advance Regards, P.Sridevi _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com

1 0

RE: [ixp1200] Re: IXA EDU Workstation CD
by Schuetze, Joel D 25 Jul '05

25 Jul '05

Krishna, Send me your mailing address and phone number and I will mail you a copy of the IXAEDU Workstation CD for the IXP1200. Cheers, Joel Schuetze IXA University Program -----Original Message----- From: ixp1200-bounces(a)lists.cs.princeton.edu [mailto:ixp1200-bounces@lists.cs.princeton.edu] On Behalf Of N V Krishna Sent: Friday, July 22, 2005 12:39 PM To: ixp1200(a)lists.cs.princeton.edu Subject: [ixp1200] Re: IXA EDU Workstation CD Hello All, Pinging again as initial ping returned no response.. I am desperately looking for some help here. I would greatly appreciate if someone can either suggest me a place where I can get the CD or can arrange for a copy of the CD. Thank you. Krishna. On Wed, 20 Jul 2005, N V Krishna wrote: # Hi, # My name is Krishna and I am a IXP1200 developer. I have a IXP1200 # ENP-2505 PCI card and two IXA SDK 2.0 Volume II cds. However, I have # lost the IXA EDU Workstation CD. Even after trying at different # sourcess, I have not been able to get a copy of that. Would any of the # subscribers have a copy of that? If so, then can anyone arrange a copy # for me? Any help in this regards would be greatly appreciated. # # Warm regards, # Krishna. # _______________________________________________ ixp1200 mailing list ixp1200(a)lists.cs.princeton.edu https://lists.cs.princeton.edu/mailman/listinfo/ixp1200

1 0

Asl driver for ixp1200 Evaluation Board
by sumeet malik 23 Jul '05

23 Jul '05

I been trying to run the example microaces supplied with sdk 2.01 on ixp1200 board. initially the ixasl.o driver had some unresolved symbols but i resolved them by linking the module against $linuxsoruce/arch/arm/mm/mm- ixp1200.c the driver has no unresolved symbols now, However when i try to load the driver by starting the ixstart script the driver ixasl.o segfaults . i would like to know whether i ace programming framework is supported by ixp1200 board if yes then from where can i download the latest drivers if anyone has them ?? it's not available on intel website.With the Deadlines to complete the project coming close i would be really thankful if u could solve this problem... Also i would like to know if ace framework is available for vxworks os.... thanking you....

1 0

IXA EDU Workstation CD
by N V Krishna 22 Jul '05

22 Jul '05

Hi, My name is Krishna and I am a IXP1200 developer. I have a IXP1200 ENP-2505 PCI card and two IXA SDK 2.0 Volume II cds. However, I have lost the IXA EDU Workstation CD. Even after trying at different sourcess, I have not been able to get a copy of that. Would any of the subscribers have a copy of that? If so, then can anyone arrange a copy for me? Any help in this regards would be greatly appreciated. Warm regards, Krishna.

2 1

Re:microstore limit
by Simon.O'Sullivan 14 Jul '05

14 Jul '05

> Hey guys, > I get a build error whenever my microengine code exceeds 1K. > This is despite the fact that in Project -> System Configuration -> Chip > settings I have selected the IXP1200 with 2K Microstore option. > Has anybody encountered a similar problem?? > To complete my project I need to utilise the entire 2K as 1K microstore is > not sufficient. > Regards, > Simon.

1 0

Re:hash unit
by Simon.O'Sullivan 04 Jul '05

04 Jul '05

I'm having trouble using the hash unit. Here is my code : typedef struct hash_t { unsigned int lo; unsigned int hi; } hash_t; hash_t in; hash_t out; in.lo = 0x50; in.hi = 0x20; hash_64((__declspec(sram_read_reg) void *)&in,(__declspec(sram_write_reg) void *)&out,1,ctx_swap); The problem is that no matter what value I assign to the data to be hashed, the output hash is always 0. It turns out that the data to be hashed remains 0 despite being assigned a non-zero value in code. I reckon the compiler puts the hash structures in SRAM (commenting out call to hash_64() results in data to be hashed being assigned the expected non-zero values). This might have something to do with taking address of the hash structures in function call (if address of variable is needed compiler puts variable in SRAM??). I've heard something about the hash multiplier being 0 by default. Could this be affecting the output hash?? Any help greatly appreciated.Also if anybody has written code involving the hash unit please send it to me.... Regards, Simon.

1 0

2xxx version of Network Systems Design finally published!
by Douglas Comer 19 Jun '05

19 Jun '05

I know several of you have been waiting for the 2xxx version of Network Systems Design. The publisher received Camera Ready Copy last July (yes, 11 months ago). Unfortunately, the book was lost for nearly 10 months because the editor had a few problems. I have finally received the first copy of the book, which means it will be in bookstores this week. Doug

1 0